PROCESSING

TRC6001
TRCP TRC6001

DP COMPACT POSITIVE HOGGER

Re-sharpening compact hogger in diamond with positive cut angle, height PCD 6 mm, suitable for working on chipboard panels, laminated, M.D.F., it can be used on squaring machines and squaring-edging machines.
Details View details  
TRC6002
TRCN TRC6002

DP COMPACT NEGATIVE HOGGER

Re-sharpening compact hogger in diamond with negative cut angle, height PCD 6 mm, suitable for working on chipboard panels, laminated, M.D.F., it can be used on squaring machines and squaring-edging machines. 
Details View details  
TRC6003
TRR TRC6003

DP COMPACT RADIUS HOGGER

Re-sharpening radius hogger in diamond with negative cut angle, height PCD 6 mm, suitable for working on chipboard panels, laminated, M.D.F., it can be used on squaring machines and squaring-edging machines
Details View details  
TRC6004
TRCG TRC6004

DP NEGATIVE HOGGER STEP GEOMETRY

Re-sharpening hogger in diamond step design, with negative cut angle, height PCD 6 mm, suitable for working on chipboard panels, laminated, M.D.F., it can be used on squaring machines and squaring-edging machines.
Details View details  
FFD4029
FFD4029

DIA ADJUSTABLE GROOVING CUTTER WITH ADJUSTABLE CHANFERING KNIFE

Re-sharpening adjustable grooving cutter in diamond with adjustable chanfering knife, suitable for grooving on chipboard panels, used on edgebanding machines.
Details View details  
FFD4038
FFD4038

PRE FINISHING EDGE TRIMMING CUTTER STEFANI-FRAVOL MACHINES

To trim edgebandings on horizontal spindles or for bevelling with inclinated spindles, for jointing and flush -cutting of solid wood, veneer and plastic edge bands for machines STEFANI-FRAVOL.
Details View details  
FFD4040
FFD4040

PRE FINISHING EDGE TRIMMING CUTTER HSK25R FOR HOMAG-IMA

To trim edgebandings on horizontal spindles or for bevelling with inclinated spindles, for jointing and flush -cutting of solid wood, veneer and plastic edge bands for machines HOMAG - IMA.
Details View details  
FFS5004
FFS5004

DIAMOND EDGE ROUNDING CUTTERS FOR HOLZ-HER FR201 WITH AIR SYSTEM

For rounding solid wood, veneer and plastic edge bands for HOLZHER FR201 with AIR SYSTEM.
Details View details  
FFS5005
FFS5005

DIAMOND EDGE ROUNDING CUTTERS FOR HOLZ-HER 1833 WITH AIR SYSTEM

For rounding solid wood, veneer and plastic edge bands for HOLZHER 1833 WITH AIR SYSTEM.
Details View details  
FFS5006
FFS5006

DIAMOND EDGE ROUNDING AND CHAMFERING CUTTERS FOR HOLZ-HER 1826

For rounding and chamfering and rounding solid wood, veneer and plastic edge bands for HOLZ-HER 1826.
Details View details  
FFS5009
FFS5009

DIAMOND EDGE ROUNDING CUTTERS FOR SCM - IDM WITH AIR SYSTEM

For rounding solid wood, veneer and plastic edge bands for SCM - IDM C1/C2 CON AIR SYSTEM.
Details View details  
FFS5008
FFS5008

DIAMOND EDGE ROUNDING CUTTERS FOR SCM - STEFANI ROUNDK AIR SYSTEM Z3

For rounding solid wood, veneer and plastic edge bands for SCM - STEFANI ROUNDK AIR SYSTEM Z3.
Details View details  
FPD2014
REFILCUT 2 EC3EB FPD2014

PCD HELICOIDAL SHANK CUTTER Z1+1 WITH COPY BEARING STEEL BODY PCD H2,5 MM

PCD shank cutter Z1+1 with copy bearing, eco PCD tips H2,5 mm resharpened up to 3 times three helicoidal wing, firt tip positive all the others negative. Suitable for working on chipboard panels, playwood, laminated, solid wood and MDF.


Details View details  
FPD2039
POWERCUT 3 FPD2039

PCD SHANK CUTTER WITH ALTERNATE CUT POS./NEG. Z4 HDM BODY WITH ROUGH/FINISCHING CUTTING TIPS

Re-sharpening shank cutter with full tips, cutting angle (2 posive - 2 negative), rough/finishing cutting tips PCD 3,0 mm, HDM body, tool suitable for nesting operation on MDF, HDF, HPL, panels also in carbon fibre, trespa and corian.


Details View details  
FPD2040
POWERCUT 5 FPD2040

PCD HELICOIDAL SHANK CUTTER Z2+2 CUTTING ANGLE 25° hdm body PCD H3,5 MM

PCD shank cutter Z2+2 for nesting, with PCD tips H3,5 mm resharpened up to 3 times, two helicoidal wing, firt tip positive all the others negative, plunge tip in PCD, cutting angle 25°, HDM (High density metal) and steel body.


Details View details  
FPD2024
ULTRACUT 1 UL FPD2024

PCD HELICOIDAL SHANK CUTTER Z3+3 STEEL BODY PCD H4,5 MM

PCD shank cutter Z3+3 with PCD tips H4,5 mm resharpened up to 8 times three helicoidal wing, firt tip positive all the others negative, plunge tip in PCD, cutting angle 20° steel body. Suitable for working on chipboard panels, laminated, solid wood and MDF.
Details View details  
FPD2054
POWERCUT 5A FPD2054

PCD HELICOIDAL SHANK CUTTER Z2+2 CUTTING ANGLE 25° STEEL body PCD H3,5 MM

PCD shank cutter Z2+2 for nesting, with PCD tips H3,5 mm resharpened up to 3 times, two helicoidal wing, firt tip positive all the others negative, plunge tip in PCD, cutting angle 25°, steel body.


Details View details  
FPD2041
POWERCUT 4N FPD2041

PCD HELICOIDAL SHANK CUTTER FOR NESTING Z3+3 HDM BODY

Re-sharpening shank cutter with split tips on three helicoidal wings, three engaged cutters on top and bottom parts, mainly negative helix, HDM body, PCD H3,5 mm. Tool suitable for nesting operation, cutters positive/negative, high working speed, good evaquation of chips, excellent finishing and low noise.
Details View details  
FPD2058
POWERCUT 4NA FPD2058

PCD HELICOIDAL SHANK CUTTER FOR NESTING Z3+3 STEEL BODY

Re-sharpening shank cutter with split tips on three helicoidal wings, three engaged cutters on top and bottom parts, mainly negative helix, STEEL body, PCD H3,5 mm. Tool suitable for nesting operation, cutters positive/negative, high working speed, good evaquation of chips, excellent finishing and low noise.
Details View details  
FPD2042
POWERCUT 4P FPD2042

PCD HELICOIDAL SHANK CUTTER FOR NESTING Z3+3 PCD H3,5 MM, HDM BODY

Re-sharpening shank cutter with split tips on three helicoidal wings, three engaged cutters on top and bottom parts, mainly positive helix, HDM (High density metal) body, PCD H3,5 mm. Tool suitable for nesting, cutters positive/negative, high working speed, good evaquation of chips, excellent finishing and low noise.
Details View details  
FPD2059
POWERCUT 8N FPD2059

PCD HELICOIDAL SHANK CUTTER FOR NESTING Z2+2 HDM body

Re-sharpening shank cutter with split tips on six helicoidal wings, three engaged cutters on top and bottom parts, mainly negative helix, HDM (High density metal) body, PCD 3,5 mm. Tool suitable for nesting operation on chipboard panels laminate, coated or on MDF, OSB, cutters positive/negative, high working speed, good evaquation of chips, excellent finishing and low noise.
Details View details  
FPD2043
POWERCUT 6N FPD2043

PCD HELICOIDAL SHANK CUTTER FOR NESTING Z3+3 HDM (HIGH DENSITY METAL) BODY PCD H3,5 MM, MAINLY NEGATIVE

Re-sharpening shank cutter with split tips on six helicoidal wings, three engaged cutters on top and bottom parts, mainly negative helix, HDM (High density metal) body, PCD 3,5 mm. Tool suitable for nesting operation on chipboard panels laminate, coated or on MDF, OSB, cutters positive/negative, high working speed, good evaquation of chips, excellent finishing and low noise.
Details View details  
FPD2052
AVANTECH 1 FPD2052

PCD HELICOIDAL SHANK CUTTERS Z2+2FOR MACHINING DOOR LOCKS, HDM (HIGH DENSITY METAL) BODY

PCD helicoidal shank cutter Z2+2 for machining door locks with body anti-vibration in HDM (High density metal). The two negative tips give a good finishing during the opetation for the slot the others two positive tips with chip breaker help the evaquation of wooden chips from the slot.
Details View details  
FPD2518
AVANTECH 2 FPD2518

HW POSITIVE SHANK CUTTER TO WORK DOOR LOCK SLOT. CHIP BREAKER Z3 WITH NEGATIVE PART FOR BETTER FINSHING OF PLATE HOUSE

HW positive shank cutter to work door lock slot. chip breaker Z3 with negative part for better finshing of plate house. Suitable to realize door lock slot and for routing, cutting on solid wood , laminated chipboard and plastic material.


Details View details  
FPD2509
FINISH 7 FPD2509

HW MILLING CUTTERS Z3 POSITIVE FOR MACHINING DOOR LOCKS

Helicoidal solid carbite router Z3 with three positive spiral. Suitable for routing, cutting and profiling on solid wood, laminated chipboard panels and plastic material. Suitable for loocksets by gradualinfeed.


Details View details  
FPD2510
RAPTOR 3 FPD2510

HW MILLING CUTTERS FOR MACHINING DOOR LOCKS FOR ROUGHING Z3 POSITIVE

HW milling cutters for finishing Z3 positive for roughing. Suitable for routing, cutting and profiling on solid wood, laminated chipboard panels and plastic material. Suitable for loocksets by gradualinfeed.


Details View details  
FPD2511
FINISH 8 FPD2511

HW MILLING CUTTERS Z3 NEGATIVE FOR MACHINING DOOR LOCKS

HW milling cutters Z3 negative. Suitable for routing, cutting and profiling on solid wood, laminated chipboard panels and plastic material. Suitable for loocksets by gradualinfeed.


Details View details  
FPD2512
RAPTOR 4 FPD2512

HW MILLING CUTTERS FOR MACHINING DOOR LOCKS FOR ROUGHING Z3 NEGATIVE

HW milling cutters for finishing Z3 negative for roughing. Suitable for routing, cutting and profiling on solid wood, laminated chipboard panels and plastic material. Suitable for loocksets by gradualinfeed.


Details View details  
FPD2514
FINISH 9 FPD2514

HW DOUBLE ACTION MILLING CUTTERS Z2+2 POSITIVE / NEGATIVE

Helicoidal solid carbite router Z2+2 with positive/negative spiral cut. Suitable for routing, cutting and shape the panels on solid wood, chipboard and plastic materials. 


Details View details  
FPD2516
POWERCUT 7W FPD2516

HW DOUBLE ACTION MILLING CUTTERS FOR HIGH SPEED NESTING Z2+2 POSITIVE/NEGATIVE

Solid carbite high speed router Z2+2 with positive/negative spiral cut. Suitable for nesting operation and also routing, cutting and shape the panels on solid wood, chipboard, MDF and playwood material.


Details View details  
LAM1010
MANUALCUT 1 LAM1010

PCD SAWBLADE FOR HARD AND ABRASIVE MATERIALS

PCD saw blade for portable or battery-powered machines for working on abrasive materials such as fiber cement, plasterboard and fiber cement.
Details View details  
FFD4001
FFD4001

DIAMOND JOINTING CUTTER D60 WITH HELICOIDAL WINGS PCD H2.5MM AXIAL 30°

Diamond jointing cutter diameter D60 with helicoidal wings  PCD H2.5mm axial 30°.
Details View details  
FFD4003
FFD4003

DIAMOND JOINTING CUTTER D60 WITH HELICOIDAL WINGS PCD H4.5 MM AXIAL 30°

Diamond jointing cutter diameter D60 with helicoidal wings  PCD H4.5 mm axial 30°.
Details View details  
FFD4005
FFD4005

DIAMOND JOINTING CUTTER D70 WITH HELICOIDAL WINGS PCD H2.5 MM AXIAL 30°

Diamond jointing cutter diameter D70 with helicoidal wings  PCD  H2.5 mm axial 30°.
Details View details  
FFD4007
FFD4007

DIAMOND JOINTING CUTTER D70 WITH HELICOIDAL WINGS PCD H4.5 MM AXIAL 30°

Diamond jointing cutter diameter 70 with helicoidal wings  PCD H4.5 mm axial 30°.
Details View details  
FFD4009
FFD4009

DIAMOND JOINTING CUTTER WITH HELICOIDAL WINGS PCD H2.5 MM AXIAL 30°

Diamond jointing cutter with helicoidal wings PCD H2.5 mm axial 30°.
Details View details  
FFD4011
FFD4011

DIAMOND JOINTING CUTTER WITH HELICOIDAL WINGS PCD H4.5 MM AXIAL 30°

Diamond jointing cutter with helicoidal wings PCD H4.5 mm axial 30°
Details View details  
FFD4014
FFD4014

DIAMOND JOINTING CUTTER D100 WITH HELICOIDAL WINGS PCD H2.5 MM AXIAL 30°

Diamond jointing cutter diameter 100 with helicoidal wings PCD H2.5 mm axial 30°.
Details View details  
FFD4016
FFD4016

DIAMOND JOINTING CUTTER D100 WITH HELICOIDAL WINGS PCD H4.5 MM AXIAL 30°

Diamond jointing cutter diameter 100 with helicoidal wings PCD H4.5 mm axial 30°.
Details View details  
FFD4020
FFD4020

DIAMOND JOINTING CUTTER WITH HELICOIDAL WINGS PCD H2.5 MM AXIAL 30°

Diamond jointing cutter with helicoidal wings PCD H2.5 mm axial 30°.
Details View details  
FFD4022
FFD4022

DIAMOND JOINTING CUTTER WITH HELICOIDAL WINGS PCD H4.5 MM AXIAL 30°

Diamond jointing cutter with helicoidal wings PCD H4.5 mm axial 30°.
Details View details  
FFD4002
FFD4002

DIAMOND JOINTING CUTTER PCD H2.5 MM AXIAL 30° WITH LOW NOISE SLOTS

Diamond jointing cutter D60 PCD H2.5mm axial 30° with low noise slots.
Details View details  
FFD4004
FFD4004

DIAMOND JOINTING CUTTER PCD H4.5 MM AXIAL 30° WITH LOW NOISE SLOTS

Diamond jointing cutter D60 PCD H4.5mm axial 30° with low noise slots
Details View details  
FFD4006
FFD4006

DIAMOND JOINTING CUTTER PCD H2.5 MM AXIAL 30° WITH LOW NOISE SLOTS

Diamond jointing cutter D60 PCD H2.5 mm axial 30° with low noise slots.
Details View details  
FFD4008
FFD4008

DIAMOND JOINTING CUTTER PCD H4.5 MM AXIAL 30° WITH LOW NOISE SLOTS

Diamond jointing cutter D60 PCD H4.5mm axial 30° with low noise slots.
Details View details  
FFD4010
FFD4010

DIAMOND JOINTING CUTTER PCD H2.5 MM AXIAL 30° WITH LOW NOISE SLOTS

Diamond jointing cutter D60 PCD H2.5 mm axial 30° with low noise slots
Details View details  
FFD4012
FFD4012

DIAMOND JOINTING CUTTER PCD H4.5 MM AXIAL 30° WITH LOW NOISE SLOTS

Diamond jointing cutter D60 PCD H4.5mm axial 30° with low noise slots.
Details View details  
FFD4015
FFD4015

DIAMOND JOINTING CUTTER PCD H4.5 MM AXIAL 30° WITH LOW NOISE SLOTS

Diamond jointing cutter D60 PCD H2.5 mm axial 30° with low noise slots.
Details View details  
FFD4017
FFD4017

DIAMOND JOINTING CUTTER PCD H4.5 MM AXIAL 30° WITH LOW NOISE SLOTS

Diamond jointing cutter D60 PCD H4.5 mm axial 30° with low noise slots
Details View details  
FFD4021
FFD4021

DIAMOND JOINTING CUTTER PCD H2.5 MM AXIAL 30° WITH LOW NOISE SLOTS

Diamond jointing cutter D60 PCD H2.5 mm axial 30° with low noise slots.
Details View details  
FFD4023
FFD4023

DIAMOND JOINTING CUTTER PCD H4.5 MM AXIAL 30° WITH LOW NOISE SLOTS

Diamond jointing cutter D60 PCD H4.5mm axial 30° with low noise slots.
Details View details  
FFD4013
FFD4013

DIAMOND JOINTING CUTTER WITH HELICOIDAL WINGS PCD H4.5 MM AXIAL 45°

Diamond jointing cutter with helicoidal wings D80/85 PCD H4.5 mm axial 45°.
Details View details  
FFD4018
FFD4018

DIAMOND JOINTING CUTTER WITH HELICOIDAL WINGS PCD H4.5 MM AXIAL 45°

Diamond jointing cutter with helicoidal wings D80/85 PCD H4.5 mm axial 45°.
Details View details  
FFD4024
FFD4024

DIAMOND JOINTING CUTTER WITH HELICOIDAL WINGS PCD H4.5 MM AXIAL 45°

Diamond jointing cutter with helicoidal wings D80/85 PCD H4.5 mm axial 45°.
Details View details  
FFD4019
FFD4019

DIAMOND JOINTING CUTTER WITH HELICOIDAL WINGS PCD H4.5 MM AXIAL 54.9°

Diamond jointing cutter with helicoidal wings D100 PCD H4.5 mm axial 54.9°.
Details View details  
FFD4025
FFD4025

DIAMOND JOINTING CUTTER WITH HELICOIDAL WINGS PCD H4.5 MM AXIAL 54.9°

Diamond jointing cutter with helicoidal wings D100 PCD H4.5 mm axial 54.9°.
Details View details  
FFD4026
LIGHT FLEX 1 FFD4026

JOINTING CUTTER WITH PCD INSERTS PCD H3 AXIAL 35°

Jointing cutter with pcd inserts, PCD H3, axial 35°. It’s possible to change the inserts position to have symmetrical and asymmetrical cutter.
Details View details  
FFD4027
LIGHT FLEX 2 FFD4027

JOINTING CUTTER WITH PCD INSERTS PCD H3 AXIAL 45°

Jointing cutter with pcd inserts, PCD H3, axial 45°. It’s possible to change the inserts position to have symmetrical and asymmetrical cutter.
Details View details  
FFD4028
LIGHT FLEX 3 FFD4028

JOINTING CUTTER WITH PCD INSERTS PCD H3 mm AXIAL 54.9°

Jointing cutter with pcd inserts, PCD H3 mm, axial 54.9°. It’s possible to change the inserts position to have symmetrical and asymmetrical cutter.
Details View details  
FFD4030
TRS 1 FFD4030

DIA ADJUSTABLE JOINTING CUTTER CUTTING ANGLE 30°

Re-sharpening and adjustable jointing cutter in diamond, made in two pieces adjustable by spacer rings, used on squaring machines.
Details View details  
FFD4031
TRS 2 FFD4031

DIA ADJUSTABLE JOINTING CUTTER cutting angle 45°

Re-sharpening and adjustable jointing cutter in diamond, made in two pieces adjustable by spacer rings, used on squaring machines.
Details View details  
FFD4032
TRS 3 FFD4032

DIA ADJUSTABLE JOINTING CUTTER cutting angle 54,9°

Re-sharpening and adjustable jointing cutter in diamond, made in two pieces adjustable by spacer rings, used on squaring machines.
Details View details  
FFD4036
GROOVINGCUT 3 FFD4036

DIA ADJUSTABLE GROOVING CUTTER WITH ADJUSTABLE CHANFERING KNIFE

Re-sharpening adjustable grooving cutter in diamond with adjustable chanfering knife, suitable for grooving on chipboard panels, used on edgebanding machines.
Details View details  
FPD2003
FULLCUT 2 EC1HN FPD2003

PCD SHANK CUTTER NEGATIVE CUT Z1 HW BODY

PCD shank cutter with negative cut Z1 carbide body. Suitable for grooving with excellent finishing on the panel surface to be used for working on chipboard panel, laminated and MDF.


Details View details  
FPD2006
FULLCUT 4 EC2HN FPD2006

PCD SHANK CUTTER NEGATIVE CUT Z2 HW BODY

PCD shank cutter with negative cut Z2 carbide body. Suitable for grooving with excellent finishing on the panel surface to be used for working on chipboard panel, laminated and MDF.


Details View details  
FPD2046
FULLCUT 7 EC2HPN FPD2046

PCD SHANK CUTTER WITH ALTER. CUT POS/NEG Z2 HW BODY

PCD shank cutter with alt. cut Z2 (1 positive cut - 1 negative cut) plung tip in PCD carbide body. Suitable for working on compact material HDF HPL corian carbon fiber and trespa.


Details View details  
FPD2055
REFILCUT 1 FPD2055

PCD SHANK CUTTER WITH ALTERNATE CUT POSITIVe/NEGATIVe Z2 HW BODY

PCD shank cutter with alt. cut Z2 (1 positive cut - 1 negative cut) plung tip in PCD carbide body. Suitable for working on compact material HDF HPL corian carbon fiber and trespa.


Details View details  
FPD2038
POWERCUT 2 FPD2038

PCD SHANK CUTTER WITH ALTERNATE CUT POS./NEG. Z2 HDM BODY WITH ROUGH/FINISCHING CUTTING TIPS

Re-sharpening shank cutter in diamond with full tips, cutting angle (1 positive - 1 negative), rough/finishing cutting tips PCD 3,0 mm, HDM body, tool suitable for nesting operation on MDF, HDF, HPL, panels also in carbon fibre, trespa and corian.


Details View details  
FPD2011
ECOCUT 1 EC2E FPD2011

PCD HELICOIDAL SHANK CUTTER Z1+1 PCD H2,5 MM

PCD shank cutter Z1+1 with eco PCD tips H2,5mm resharpened up to 3 times two helicoidal wing, firt tip positive all the others negative, plunge tip in HW steel body or HDM body. Suitable for working on chipboard panels, playwood, laminated, solid wood and MDF.
Details View details  
FPD2053
ECOCUT 2 EC2EH HDM FPD2053

PCD HELICOIDAL SHANK CUTTER Z1+1 PCD H2,5 MM

PCD shank cutter Z1+1 with eco PCD tips H2,5mm resharpened up to 3 times two helicoidal wing, firt tip positive all the others negative, plunge tip in DIA steel body or HDM body. Suitable for working on chipboard panels, playwood, laminated, solid wood and MDF.
Details View details  
FPD2012
ECOCUT 3 EC3E FPD2012

PCD HELICOIDAL SHANK CUTTER Z1+1 STEEL BODY PCD H2,5 MM

PCD shank cutter Z1+1 with eco PCD tips H2,5 mm resharpened up to 3 times three helicoidal wing, firt tip positive all the others negative, plunge tip in HW, steel body.


Details View details  
FPD2013
ECOCUT PLUS 1 RC3 FPD2013

PCD HELICOIDAL SHANK CUTTER Z1+1 STEEL BODY PCD H4,5 mm

PCD shank cutter Z1+1 with eco PCD tips H4,5 mm resharpened up to 8 times three helicoidal wing, firt tip positive all the others negative, plunge tip in HW steel body. Suitable for working on chipboard panels, playwood, laminated, solid wood and MDF.
Details View details  
FPD2045
ECOCUT 5 EC3H FPD2045

PCD HELICOIDAL SHANK CUTTER Z1+1 HW BODY PCD H2,5 MM

PCD shank cutter Z1+1 with eco PCD tips H2,5 mm resharpened up to 3 times three helicoidal wing, firt tip positive all the others negative, plunge tip in HW, HW body.


Details View details  
FPD2015
ECOCUT 6 EC4E FPD2015

PCD HELICOIDAL SHANK CUTTER Z2+2 STEEL BODY PCD H2,5 MM

PCD shank cutter Z2+2 with PCD tips H2,5 mm, 4 helicoidal wing, firt tip positive all the others negative, plunge tip in HW steel body cutting angle 20°. Suitable for working on chipboard panels, playwood, laminated, solid wood and MDF.


Details View details  
FPD2016
ECOCUT PLUS 2 RC4 FPD2016

PCD HELICOIDAL SHANK CUTTER Z2+2 STEEL BODY PCD H4,5 MM

PCD shank cutter Z2+2 with PCD tips H4,5 mm resharpened up to 8 times four helicoidal wing, firt tip positive all the others negative, plunge tip in HW steel body cutting angle 20°. Suitable for working on chipboard panels, playwood, laminated, solid wood, MDF and polymers.
Details View details  
FPD2017
ECOCUT 8 EC4S FPD2017

PCD HELICOIDAL SHANK CUTTER Z1+1 / 2+2 STEEL BODY PCD H 2,5 MM

PCD shank cutter Z2+2 on top and bottom part Z1+1 in the midle part with PCD tips H2,5 mm resharpened up to 3 times four helicoidal wing, firt tip positive all the others negative, plunge tip in HW, steel body cutting angle 20°. Suitable for working on chipboard panels, playwood, laminated, solid wood, MDF and polymers.
Details View details  
FPD2020
ECX3 FPD2020

PCD HELICOIDAL SHANK CUTTER Z2+2 STEEL BODY PCD H2,5 MM

PCD shank cutter Z2+2 with eco PCD tips H2,5 mm resharpened up to 3 times three helicoidal wing , firt tip positive all the others negative, plunge tip in HW,cutting angle 20° steel body. Suitable for working on chipboard panels, laminated, solid wood, MDF and polymers.
Details View details  
FPD2021
RX3 FPD2021

PCD HELICOIDAL SHANK CUTTER Z2+2 STEEL BODY PCD H4,5 MM

PCD shank cutter Z2+2 with PCD tips H4,5 mm resharpened up to 8 times three helicoidal wing, firt tip positive all the others negative, plunge tip in PCD, cutting angle 20° steel body. Suitable for working on chipboard panels, laminated, solid wood, MDF and polymers.
Details View details  
FPD2025
ULTRACUT 2 ULC FPD2025

PCD HELICOIDAL SHANK CUTTER Z3+3 STEEL BODY PCD H4,5 MM

PCD shank cutter Z3+3 with PCD tips H4,5 mm resharpened up to 8 times three helicoidal wing, tip mainly positive for better evaquaton of wooden chips, plunge tip in PCD, cutting angle 20° steel body. Suitable for working on chipboard panels, laminated and MDF.
Details View details  
FPD2028
STARCUT 1 RX4 FPD2028

PCD HELICOIDAL SHANK CUTTER Z2+2CUTTING ANGLE 30° STEEL BODY PCD H4,5 MM

PCD shank cutter Z2+2 with PCD tips H4,5 mm resharpened up to 8 times four helicoidal wing, firt tip positive all the others negative, plunge tip in PCD, cutting angle 30° steel body. Suitable for working on chipboard panels, playwood, laminated, solid wood and MDF.
Details View details  
FPD2057
STARCUT 2 RX4 FPD2057

PCD HELICOIDAL SHANK CUTTER Z2+2CUTTING ANGLE 30° STEEL BODY PCD H4,5 MM FIRST PCD TIP POSITIVE 5 MM FOR SMALL THICKNESS

PCD shank cutter Z2+2 with PCD tips H4,5 mm resharpened up to 8 times four helicoidal wing, firt tip positive all the others negative, plunge tip in PCD, cutting angle 30° steel body. Suitable for working on chipboard panels, playwood, laminated, solid wood and MDF.
Details View details  
FPD2029
STARCUT 3 RX4C FPD2029

PCD HELICOIDAL SHANK CUTTER Z2+2 CUTTING ANGLE 30° STEEL BODY PCD H4,5 MM

PCD shank cutter Z2+2 with PCD tips H4,5 mm resharpened up to 8 times four helicoidal wing, tip mainly positive for better evaquaton of wooden chips, plunge tip in PCD, cutting angle 30° steel body. Suitable for working on chipboard panels, playwood, laminated, solid wood and MDF.
Details View details  
FPD2033
STARCUT 4 RX4S FPD2033

PCD HELICOIDAL SHANK CUTTER Z2+2 CUTTING ANGLE 45° STEEL BODY PCD H4,5 MM

PCD shank cutter Z2+2 with PCD tips H4,5 mm resharpened up to 8 times four helicoidal wing, firt tip positive all the others negative, plunge tip in PCD, cutting angle 45° steel body. Suitable for working on chipboard panels, playwood, laminated, solid wood and MDF.
Details View details  
FPD2034
STARCUT 5 RX4SC FPD2034

PCD HELICOIDAL SHANK CUTTER Z2+2 CUTTING ANGLE 45° STEEL BODY PCD H4,5 MM

PCD shank cutter Z2+2 with PCD tips H4,5 mm resharpened up to 8 times four helicoidal wing, tip mainly positive for better evaquaton of wooden chips, plunge tip in PCD, cutting angle 30° steel body. Suitable for working on chipboard panels, playwood, laminated, solid wood and MDF.
Details View details  
FPD2036
EXTREME 1 REX2 FPD2036

PCD HELICOIDAL SHANK CUTTER Z2+2 CUTTING ANGLE 54,9° STEEL BODY PCD H4,5 MM

PCD shank cutter Z2+2 mm with PCD tips H4,5 mm resharpened up to 8 times four helicoidal wing, firt tip positive all the others negative, plunge tip in PCD, cutting angle 54,9° steel body. Suitable for working high-performance jointing and sizing of solid woods (free of knots) along and accross the grain, jointing of melamine, paper, HPL laminated, foiled and veneered panels and lacquered surfaces, on chipboard, playwood, laminated and MDF.
Details View details  
FPD2030
AIRCUT 1 RX6 FPD2030

PCD HELICOIDAL SHANK CUTTER Z3+3 CUTTING ANGLE 30° STEEL BODY PCD H4,5 MM

PCD shank cutter Z3+3 with PCD tips H4,5 mm resharpened up to 8 times four helicoidal wing, firt tip positive all the others negative, plunge tip in PCD, cutting angle 30° steel body. Suitable for working on chipboard panels, playwood, laminated, solid wood and MDF.
Details View details  
FPD2048
STARCUT 6 RX4B FPD2048

PCD HELICOIDAL SHANK CUTTERS Z2+2 DOUBLE ROTATION

PCD helicoidal shank cutter Z2+2 double rotation LH/RH with PCD tips H4,5 mm resharpened up to 8 times, four helicoidal wing, firt tip positive all the others negative, plunge tip in PCD steel body cutting angle 30°. Suitable for working on laminated chipboard panels, playwood, laminated and laminated MDF.
Details View details  
FPD2049
ULTRACUT 3 ULB FPD2049

PCD HELICOIDAL SHANK CUTTERS Z3+3 DOUBLE ROTATION

PCD helicoidal shank cutter Z3+3 double rotation LH/RH with PCD tips H4,5 mm resharpened up to 8 times, three helicoidal wing, plunge tip in PCD steel body cutting angle 20°. Suitable for working on laminated chipboard panels and laminated MDF.


Details View details  
FPD2050
STARCUT 7 TRPE FPD2050

PCD RECTIFYING SHANK CUTTERS Z4+4 CUTTING ANGLE 40°

PCD rectifying shank cutter Z4+4 with PCD tips H4,5 mm resharpened up to 8 times, eight helicoidal wing, cutting angle 40°. Suitable for working on laminated chipboard panels, laminated MDF and laminated playwood.


Details View details  
FPD2060
EXTREME 2 TRPX FPD2060

PCD RECTIFY SHANK CUTTERS Z3+3 CUTTING ANGLE 54,9°

PCD rectifying shank cutter Z3+3 with PCD tips H4,5 mm resharpened up to 6 times, cutting angle 54,9°. Suitable for working on laminated chipboard panels, laminated MDF and laminated playwood.


Details View details  
FPD2507
FINISH 6 FPD2507

HW MILLING CUTTERS Z3 NEGATIVE

HW milling cutters Z3 negativo for roughing. Suitable for routing, cutting and profiling on solid wood, laminated chipboard panels and plastic material.


Details View details  
FPD2506
RAPTOR 1 FPD2506

HW MILLING CUTTERS Z3 POSITIVE

HW milling cutters Z3 positive for roughing.Suitable for routing, cutting and profiling on solid wood, laminated chipboard panels and plastic material.


Details View details  
FPD2508
RAPTOR 2 FPD2508

HW MILLING CUTTERS Z3 NEGATIVE

HW milling cutters Z3 negativo for roughing. Suitable for routing, cutting and profiling on solid wood, laminated chipboard panels and plastic material.


Details View details  
FPS3011
V CUT 1 VGROOVE 90° FPS3011

PCD “V” GROVING AND FOR CHAMFERING AT 45° Z2

Suitable for “V’ Grooving, bevelling and chamfering at 45°. Steel body and PCD shank cutter Z2 H4,5mm resharpened for long life and to ensure a perfect finish on MDF, HDF, particle board, plywood, light wood, corian, plexiglass, plaster fiber e fiber cement.
Details View details  
FPS3012
V CUT 2 VGROOVE 90° Z1+1 FPS3012

PCD “V” FOLDING GROOVING AND FOR CHAMFERING AT 45° Z1+1

Suitable for “V’ Grooving, bevelling and chamfering at 45°. Steel body and PCD shank cutter Z1+1 H4,5mm resharpened for long life and to ensure a perfect finish on MDF, HDF, particle board, plywood, light wood, corian, plexiglass, plaster fiber e fiber cement.
Details View details  
FPS3013
V CUT 3 VGROOVE 90° Z2+2 FPS3013

PCD “V” FOLDING GROOVING AND FOR CHAMFERING AT 45° Z2+2

Suitable for “V’ Grooving, bevelling and chamfering at 45°. Steel body and PCD shank cutter Z2+2 H4,5mm resharpened for long life and to ensure a perfect finish on MDF, HDF, particle board, plywood, light wood, corian, plexiglass, plaster fiber e fiber cement.
Details View details  
FPS3001
MFX 1 FPS3001

High precision shank cutter multitasking with interchangeable profiled PCD insert with copy bearing

Insert PCD shank cutter multitasking with interchangeable profiled knife and copy bearing. Suitable for profiling on different materials such as solid wood, laminated chipboard panels, playwood MDF, HDF, HPL, Trespa, Corian, Carbon fiber panels (CFRP), Teflon, plaxiglass, aluminnium and others plastic materials. 
Details View details  
FPS3002
MFX 2 FPS3002

High precision shank cutter multitasking with interchangeable profiled PCD inserts with center cutting knife

Insert PCD shank cutter multitasking with interchangeable profiled knife and center cutting knife. Suitable for profiling on different materials such as solid wood, laminated chipboard panels, playwood MDF, HDF, HPL, Trespa, Corian, Carbon fiber panels (CFRP), Teflon, plaxiglass, aluminnium and others plastic materials.
Details View details  
FPS3003
MFX 3 FPS3003

High precision shank cutter with interchangeable PCD profiled inserts for “V“ profiles at 90° / 91°

Insert PCD shank cutter with interchangeable profiled knife for cutting “V“ profiles at 90° / 91° Z=1. Suitable for profiling or for folding operation on different materials such as solid wood, laminated chipboard panels, playwood MDF, HDF, HPL, Trespa, Corian, Carbon fiber panels (CFRP), Teflon, plaxiglass, aluminnium and others plastic materials.
Details View details  
FPS3004
MFX 4 FPS3004

High precision shank cutter with interchangeable PCD profiled inserts for “V“ profiles at 90° / 91°

Insert PCD shank cutter with interchangeable profiled knife for cutting “V“ profiles at 90° / 91° Z=1+1. Suitable for profiling or for folding operation on different materials such as solid wood, laminated chipboard panels, playwood MDF, HDF, HPL, Trespa, Corian, Carbon fiber panels (CFRP), Teflon, plaxiglass, aluminnium and others plastic materials.
Details View details  
FPS3005
MFX 5 FPS3005

High precision shank cutter with interchangeable PCD inserts for planing slave panels and CNC machine tables

Insert PCD shank cutter with interchangeable profiled knife for planning slave panels during nesting and for calibrating CNC machine tables. Suitable for working on different materials such as MDF, HDF, HPL, Trespa, Carbon fiber panels (CFRP).
Details View details  
FPS3006
MFX 6 FPS3006

High precision shank cutter with interchangeable PCD inserts for planing slave panels and CNC machine tables

Insert PCD shank cutter with interchangeable profiled knife for planning slave panels during nesting and for calibrating CNC machine tables. Suitable for working on different materials such as MDF, HDF, HPL, Trespa, Carbon fiber panels (CFRP).
Details View details  
PFO7005
PLCR INFINITY 5 PFO7005

PCD BLIND HOLES DRILLING BIT Z2+2 WITH CHIP BREAKER

PCD high performance blind holes drilling bit Z2+2 with negative shaver tips and chip breaker. Suitable for drilling on laminated chipboard panels MDF.
Details View details  
PFO7006
PFS PFO7006

PCD BLIND HOLES DRILLING BIT Z2+2 WITH COUNTERSINK

PCD high performance blind holes drilling bit Z2+2 with negative countersink tips and HW center tip. Suitable for drilling on laminated chipboard panels MDF
Details View details  
PFO7501
FOUR LINE PFO7501

4 FLUTE DOWEL DRILLS

Super-strLENGTH steel, cutter portion coated with black or orange P.T.F.E.. HW head with precision balanced centre point, 2 HW precision ground cutting edges (Z2), 2 negatively ground spurs (V2), 4 spiral flutes. Parallel shank with driving flat and LENGTH adjusting screw.
Details View details  
PFO7502
FOUR LINE PFO7502

4 FLUTE DOWEL DRILLS

Super-strLENGTH steel, cutter portion coated with black or orange P.T.F.E.. HW head with precision balanced centre point, 2 HW precision ground cutting edges (Z2), 2 negatively ground spurs (V2), 4 spiral flutes. Parallel shank with driving flat and LENGTH adjusting screw.
Details View details  
PFO7503
FOUR LINE PFO7503

4 FLUTE DOWEL DRILLS

Super-strLENGTH steel, cutter portion coated with black or orange P.T.F.E.. HW head with precision balanced centre point, 2 HW precision ground cutting edges (Z2), 2 negatively ground spurs (V2), 4 spiral flutes. Parallel shank with driving flat and LENGTH adjusting screw.
Details View details  
PFO7504
FOUR LINE PFO7504

4 FLUTE DOWEL DRILLS

Super-strLENGTH steel, cutter portion coated with black or orange P.T.F.E.. HW head with precision balanced centre point, 2 HW precision ground cutting edges (Z2), 2 negatively ground spurs (V2), 4 spiral flutes. Parallel shank with driving flat and LENGTH adjusting screw.
Details View details  
PFO7507
TWO LINE PFO7507

2 FLUTE DOWEL DRILLS

Super-strLENGTH steel, Spiral portion coated with orange or black P.T.F.E.. HW head with precision balanced centre point, 2 HW precision ground cutting edges (Z2), 2 negatively ground spurs (V2), 2 spiral flutes. Parallel shank with driving flat and LENGTH adjusting screw.
Details View details  
PFO7508
TWO LINE PFO7508

2 FLUTE DOWEL DRILLS

Super-strLENGTH steel, Spiral portion coated with orange or black P.T.F.E.. HW head with precision balanced centre point, 2 HW precision ground cutting edges (Z2), 2 negatively ground spurs (V2), 2 spiral flutes. Parallel shank with driving flat and LENGTH adjusting screw.
Details View details  
PFO7510
R-LINE PFO7510

DOWEL DRILLS

Premium quality super strLENGTH steel for improved resistance and durability. Premium quality HWM spiral portion. 2 cutting edges (Z2) + 2 negatively ground spurs (V2), 2 spiral flutes, parallel shank with driving flat and adjustable screw LENGTH. Recommended feed speed 1÷ 4m/minute –RPM 6000.
Details View details  
PFO7512
POWER LINE PFO7512

SOLID CARBIDE DOWEL DRILLS

Premium quality super strLENGTH steel for improved resistance and durability. Premium quality HWM spiral portion. 2 cutting edges (Z2) + 2 negatively ground spurs (V2), 2 spiral flutes. Parallel shank with driving flat and adjustable screw LENGTH. Recommended feed speed 1÷ 4m/minute –RPM 6000.
Details View details  
PFO7513
POWER LINE PFO7513

SOLID CARBIDE DOWEL DRILLS

Premium quality super strLENGTH steel for improved resistance and durability. Premium quality HWM spiral portion. 2 cutting edges (Z2) + 2 negatively ground spurs (V2), 2 spiral flutes. Parallel shank with driving flat and adjustable screw LENGTH. Recommended feed speed 1÷ 4m/minute –RPM 6000.
Details View details  
PFO7514
EXTREME PFO7514

SOLID CARBIDE DOWER DRILL HWM

Premium quality super strLENGTH steel for improved resistance and durability. Premium quality HWM spiral portion. 2 cutting edges (Z2) + 2 negatively ground spurs (V2), 2 spiral flutes, parallel shank with driving flat and adjustable screw LENGTH. Recommended feed speed 1÷ 4m/minute –RPM 6000.
Details View details  
PFO7515
PLCH PFO7515

HINGE BORING BITS

Super-strLENGTH steel. Cutter portion coated with orange or black P.T.F.E., HW head with precision balanced centre point. 2 HW precision ground cutting edges (Z2), 2 negatively ground spurs (V2). Parallel shank with driving flat and LENGTH adjusting screw.
Details View details  
PFO7516
PLCH PFO7516

HINGE BORING BITS

Super-strLENGTH steel. Cutter portion coated with orange or black P.T.F.E., HW head with precision balanced centre point. 2 HW precision ground cutting edges (Z2), 2 negatively ground spurs (V2). Parallel shank with driving flat and LENGTH adjusting screw.
Details View details  
PFO7517
PLCH PFO7517

HINGE BORING BITS

Super-strLENGTH steel. Cutter portion coated with orange or black P.T.F.E., HW head with precision balanced centre point. 2 HW precision ground cutting edges (Z2), 2 negatively ground spurs (V2). Parallel shank with driving flat and LENGTH adjusting screw.
Details View details  
PFO7518
FLINE L PFO7518

HW THROUGH HOLES DRILLING BIT

Super-strLENGTH steel. Spiral portion coated with orange or black P.T.F.E., HW head with precision balanced centre point. 2 precision ground cutting edges (Z2), 4 spiral flutes. Parallel shank with driving flat and LENGTH adjusting screw.
Details View details  
PFO7521
TLINE L PFO7521

HW THROUGH HOLES DRILLING BIT

Super-strLENGTH steel. Spiral portion coated with orange or black P.T.F.E., HW head with precision balanced centre point. 2 precision ground cutting edges (Z2), 4 spiral flutes. Parallel shank with driving flat and LENGTH adjusting screw
Details View details  
PFO7522
TLINE L PFO7522

HW THROUGH HOLES DRILLING BIT

Super-strLENGTH steel. Spiral portion coated with orange or black P.T.F.E., HW head with precision balanced centre point. 2 precision ground cutting edges (Z2), 4 spiral flutes. Parallel shank with driving flat and LENGTH adjusting screw.
Details View details  
PFO7524
TLINE 2L PFO7524

HW THROUGH HOLES DRILLING BIT WITH SPECIAL SHARPENING

Premium quality super-strLENGTH steel. Spiral portion coated with orange or black P.T.F.E., extra-fine micrograin carbide spiral portion with centre point. HW head with precision balanced centre point. 2 precision ground cutting edges (Z2), Double angle, 2 spiral flutes. Parallel shank with driving flat and adjustable screw LENGTH.
Details View details  
PFO7525
TLINE 2L PFO7525

HW THROUGH HOLES DRILLING BIT WITH SPECIAL SHARPENING

Premium quality super-strLENGTH steel. Spiral portion coated with orange or black P.T.F.E., extra-fine micrograin carbide spiral portion with centre point. HW head with precision balanced centre point. 2 precision ground cutting edges (Z2), Double angle, 2 spiral flutes. Parallel shank with driving flat and adjustable screw LENGTH.
Details View details  
PFO7526
TLINE 2LH PFO7526

HW THROUGH HOLES DRILLING BIT WITH SPECIAL SHARPENING

Premium quality super-strLENGTH steel. HWM spiral portion with centre point. 2 cutting edges (Z2), 2 spiral flutes, 2 curved, negatively ground spurs (V2), Parallel shank with driving flat and adjustable screw LENGTH. Parallel shank with driving flat and adjustable screw LENGTH.
Details View details  
PFO7527
TLINE 2LH PFO7527

HW THROUGH HOLES DRILLING BIT WITH SPECIAL SHARPENING

Premium quality super-strLENGTH steel. HWM spiral portion with centre point. 2 cutting edges (Z2), 2 spiral flutes, 2 curved, negatively ground spurs (V2), Parallel shank with driving flat and adjustable screw LENGTH. Parallel shank with driving flat and adjustable screw LENGTH.
Details View details  
PFO7532
SVP SVASATORE PIANE PFO7532

SOLID CARBIDE DOWEL DRILL WITH COUNTERSINK

Super-strLENGTH steel. Spiral portion coated with orange or black P.T.F.E., HW head with precision balanced centre point, 2 precision ground cutting edges (Z2), 2 ground spurs (V2), 2 spiral flutes. Parallel shank with driving flat and LENGTH adjusting screw.
Details View details  
PFO7533
SVP SVASATORE PIANE PFO7533

SOLID CARBIDE DOWEL DRILL WITH COUNTERSINK

Super-strLENGTH steel. Spiral portion coated with orange or black P.T.F.E., HW head with precision balanced centre point, 2 precision ground cutting edges (Z2), 2 ground spurs (V2), 2 spiral flutes. Parallel shank with driving flat and LENGTH adjusting screw.
Details View details  
PFO7534
SLV PFO7534

SOLID CARBIDE THROUGH HOLES DOWEL DRILL WITH COUNTERSINK

Super-strLENGTH steel. Spiral portion coated with orange or black P.T.F.E., HW head with precision balanced centre point. 2 precision ground cutting edges (Z2), 4 spiral flutes. Parallel shank with driving flat and LENGTH adjusting screw.
Details View details  
PFO7528
PFO7528

SOLID CARBIDE DRILLING BIT FOR Through HOLES

Premium quality HWM. 2 precision ground cutting edges (Z2), 2 spiral flutes. Common shank and drilling diametre (S=D).
Details View details  
PFO7529
PFO7529

SOLID CARBIDE DRILLING BIT FOR BLIND HOLES

Premium quality HWM. 2 precision ground cutting edges (Z2), 2 spiral flutes. Common shank and drilling diametre (S=D).
Details View details  
PFO7530
PFO7530

COUNTER SINK FOR DOWEL DRILLS MOD FLINE

Super-strLENGTH steel. 2 precision ground carbide tipped cutting edges (Z2). Direct clamp on the shank of the drills.
Details View details  
PFO7531
PFO7531

COUNTER SINK FOR DOWEL DRILLS MOD TLINE

Super-strLENGTH steel. 2 precision ground carbide tipped cutting edges (Z2). Direct clamp on the shank of the drills.
Details View details  
FFS5002
FFS5002

DIAMOND EDGE ROUNDING CUTTERS FOR HOLZ-HER 1832 WITH AIR SYSTEM

For rounding solid wood, veneer and plastic edge bands for HOLZHER 1832 with AIR SYSTEM
Details View details  
FFS5007
FFS5007

DIAMOND EDGE ROUNDING AND CHAMFERING CUTTERS FOR HOLZ-HER FR701

For rounding and chamfering and rounding solid wood, veneer and plastic edge bands for HOLZ-HER FR701.
Details View details  
PFO7505
FOUR LINE PFO7505

4 FLUTE DOWEL DRILLS

Super-strLENGTH steel, cutter portion coated with black or orange P.T.F.E.. HW head with precision balanced centre point, 2 HW precision ground cutting edges (Z2), 2 negatively ground spurs (V2), 4 spiral flutes. Parallel shank with driving flat and LENGTH adjusting screw.
Details View details  
PFO7506
FOUR LINE PFO7506

4 FLUTE DOWEL DRILLS

Super-strLENGTH steel, cutter portion coated with black or orange P.T.F.E.. HW head with precision balanced centre point, 2 HW precision ground cutting edges (Z2), 2 negatively ground spurs (V2), 4 spiral flutes. Parallel shank with driving flat and LENGTH adjusting screw.
Details View details  
PFO7509
TWO LINE PFO7509

2 FLUTE DOWEL DRILLS

Super-strLENGTH steel, Spiral portion coated with orange or black P.T.F.E.. HW head with precision balanced centre point, 2 HW precision ground cutting edges (Z2), 2 negatively ground spurs (V2), 2 spiral flutes. Parallel shank with driving flat and LENGTH adjusting screw.
Details View details  
PFO7511
R-LINE PFO7511

DOWEL DRILLS

Premium quality super strLENGTH steel for improved resistance and durability. Premium quality HWM spiral portion. 2 cutting edges (Z2) + 2 negatively ground spurs (V2), 2 spiral flutes, parallel shank with driving flat and adjustable screw LENGTH. Recommended feed speed 1÷ 4m/minute –RPM 6000.
Details View details  
PFO7519
FLINE L PFO7519

HW THROUGH HOLES DRILLING BIT

Super-strLENGTH steel. Spiral portion coated with orange or black P.T.F.E., HW head with precision balanced centre point. 2 precision ground cutting edges (Z2), 4 spiral flutes. Parallel shank with driving flat and LENGTH adjusting screw.
Details View details  
PFO7520
FLINE L PFO7520

HW THROUGH HOLES DRILLING BIT

Super-strLENGTH steel. Spiral portion coated with orange or black P.T.F.E., HW head with precision balanced centre point. 2 precision ground cutting edges (Z2), 4 spiral flutes. Parallel shank with driving flat and LENGTH adjusting screw.
Details View details  
PFO7523
TLINE L PFO7523

HW THROUGH HOLES DRILLING BIT

Super-strLENGTH steel. Spiral portion coated with orange or black P.T.F.E., HW head with precision balanced centre point. 2 precision ground cutting edges (Z2), 4 spiral flutes. Parallel shank with driving flat and LENGTH adjusting screw.
Details View details  
FPS3502
VARIO 3 FPS3502

ADJUSTABLE CUTTER WITH INTERCHANGEABLE HW KNIFE 90°

Disposable insert router cutter complete with two cutting flutes Z2. Suitable for producing chamfer cuts at various angles in softwood, hardwood and other materials. Cutting angle can be adjusted steps by using a notched scale. Fine adjustment of 1° is also possible. For use on machining centers with CNC control.
Details View details  
FPS3503
VARIO 2 FPS3503

ADJUSTABLE CUTTER WITH INTERCHANGEABLE HW KNIFE 135°

Disposable insert router cutter complete with two cutting flutes Z2. Suitable for producing chamfer cuts at various angles in softwood, hardwood and other materials. Cutting angle can be adjusted steps by using a notched scale. For use on machining centers with CNC control.
Details View details  
FPS3033
V CUT 6 FPS3033

PCD V SHANK CUTTER 90° Z2+2 POSITIVE AND NEGATIVE AXIAL CUT

Suitable for chamfering at 45°. Steel body and Z2+2 PCD H4,5mm resharpened for long life and to ensure a perfect finish on MDF, HDF, particle board, plywood, light wood, hard wood. 
Details View details  
FPS3035
JOINT CUT 3 FPS3035

DIAMOND JOINT CUTTER Z2+2 WITH AXIAL POS/NEG

Diamond joint cutter 45°. Steel body. PCD Z2+2 positive negative H4.5mm regrindable 8 times. Excellent performance and finish on MDF, HDF, chipboard, plywood, softwood, hardwood.
Details View details  
FPD2066
FPD2066

DIAMOND FLY CUTTER WITH NEGATIVE CUTTERS

Diamond cutter for drilling, smoothing and making grooves. Negative axial angle for maximum lateral finish. Diamond drill up to the center of the cutter.


Details View details