CUTTERS

FULLCUT 1 EC1H FPD2001

PCD SHANK CUTTER STRAIGHT CUT Z1 HW BODY

PCD shank cutter with straight cut Z1 carbide body. Suitable for working on chipboard panels, playwood, laminated, solid wood, corian-polymers and MDF.

Details View details  

FULLCUT 2 EC1HN FPD2003

PCD SHANK CUTTER NEGATIVE CUT Z1 HW BODY

PCD shank cutter with negative cut Z1 carbide body. Suitable for grooving with excellent finishing on the panel surface to be used for working on chipboard panel, laminated and MDF.

Details View details  

FULLCUT 3 EC2H FPD2004

PCD SHANK CUTTER STRAIGHT CUT Z2 HW BODY

PCD shank cutter with straight cut Z2 carbide body. Suitable for working on chipboard panels, playwood, laminated, solid wood, corian-polymers and MDF.

Details View details  

FULLCUT 4 EC2HN FPD2006

PCD SHANK CUTTER NEGATIVE CUT Z2 HW BODY

PCD shank cutter with negative cut Z2 carbide body. Suitable for grooving with excellent finishing on the panel surface to be used for working on chipboard panel, laminated and MDF.

Details View details  

FULLCUT 5 EC2A FPD2009

PCD SHANK CUTTER STRAIGHT CUT Z2 STEEL BODY

PCD shank cutter with straight cut Z2 steel body. Suitable for working on chipboard panels, playwood, laminated, solid wood, corian-polymers and MDF.

Details View details  

FULLCUT 6 EC2AN FPD2010

PCD SHANK CUTTER negative CUT Z2 STEEL BODY

PCD shank cutter with negative cut Z2 steel body. Suitable for working on chipboard panels, playwood, laminated, solid wood, corian-polymers and MDF.

Details View details  

FULLCUT 7 EC2HPN FPD2046

PCD SHANK CUTTER WITH ALTER. CUT POS/NEG Z2 HW BODY

PCD shank cutter with alt. cut Z2 (1 positive cut - 1 negative cut) plung tip in PCD carbide body. Suitable for working on compact material HDF HPL corian carbon fiber and trespa.

Details View details  

REFILCUT 1 FPD2055

PCD SHANK CUTTER WITH ALTERNATE CUT POSITIVe/NEGATIVe Z2 HW BODY

PCD shank cutter with alt. cut Z2 (1 positive cut - 1 negative cut) plung tip in PCD carbide body. Suitable for working on compact material HDF HPL corian carbon fiber and trespa.

Details View details  

POWERCUT 2 FPD2038

PCD SHANK CUTTER WITH ALTERNATE CUT POS./NEG. Z2 HDM BODY WITH ROUGH/FINISCHING CUTTING TIPS

Re-sharpening shank cutter in diamond with full tips, cutting angle (1 positive - 1 negative), rough/finishing cutting tips PCD 3,0 mm, HDM body, tool suitable for nesting operation on MDF, HDF, HPL, panels also in carbon fibre, trespa and corian.

Details View details  

POWERCUT 3 FPD2039

PCD SHANK CUTTER WITH ALTERNATE CUT POS./NEG. Z4 HDM BODY WITH ROUGH/FINISCHING CUTTING TIPS

Re-sharpening shank cutter with full tips, cutting angle (2 posive - 2 negative), rough/finishing cutting tips PCD 3,0 mm, HDM body, tool suitable for nesting operation on MDF, HDF, HPL, panels also in carbon fibre, trespa and corian.

Details View details  

ECOCUT 1 EC2E FPD2011

PCD HELICOIDAL SHANK CUTTER Z1+1 PCD H2,5 MM

PCD shank cutter Z1+1 with eco PCD tips H2,5mm resharpened up to 3 times two helicoidal wing, firt tip positive all the others negative, plunge tip in HW steel body or HDM body. Suitable for working on chipboard panels, playwood, laminated, solid wood and MDF.

Details View details  

ECOCUT 2 EC2EH HDM FPD2053

PCD HELICOIDAL SHANK CUTTER Z1+1 PCD H2,5 MM

PCD shank cutter Z1+1 with eco PCD tips H2,5mm resharpened up to 3 times two helicoidal wing, firt tip positive all the others negative, plunge tip in DIA steel body or HDM body. Suitable for working on chipboard panels, playwood, laminated, solid wood and MDF.

Details View details  

ECOCUT 3 EC3E FPD2012

PCD HELICOIDAL SHANK CUTTER Z1+1 STEEL BODY PCD H2,5 MM

PCD shank cutter Z1+1 with eco PCD tips H2,5 mm resharpened up to 3 times three helicoidal wing, firt tip positive all the others negative, plunge tip in HW, steel body.

Details View details  

ECOCUT PLUS 1 RC3 FPD2013

PCD HELICOIDAL SHANK CUTTER Z1+1 STEEL BODY PCD H4,5 mm

PCD shank cutter Z1+1 with eco PCD tips H4,5 mm resharpened up to 8 times three helicoidal wing, firt tip positive all the others negative, plunge tip in HW steel body. Suitable for working on chipboard panels, playwood, laminated, solid wood and MDF.

Details View details  

ECOCUT 5 EC3H FPD2045

PCD HELICOIDAL SHANK CUTTER Z1+1 HW BODY PCD H2,5 MM

PCD shank cutter Z1+1 with eco PCD tips H2,5 mm resharpened up to 3 times three helicoidal wing, firt tip positive all the others negative, plunge tip in HW, HW body.

Details View details  

ECOCUT 6 EC4E FPD2015

PCD HELICOIDAL SHANK CUTTER Z2+2 STEEL BODY PCD H2,5 MM

PCD shank cutter Z2+2 with PCD tips H2,5 mm, 4 helicoidal wing, firt tip positive all the others negative, plunge tip in HW steel body cutting angle 20°. Suitable for working on chipboard panels, playwood, laminated, solid wood and MDF.

Details View details  

ECOCUT PLUS 2 RC4 FPD2016

PCD HELICOIDAL SHANK CUTTER Z2+2 STEEL BODY PCD H4,5 MM

PCD shank cutter Z2+2 with PCD tips H4,5 mm resharpened up to 8 times four helicoidal wing, firt tip positive all the others negative, plunge tip in HW steel body cutting angle 20°. Suitable for working on chipboard panels, playwood, laminated, solid wood, MDF and polymers.

Details View details  

ECOCUT 8 EC4S FPD2017

PCD HELICOIDAL SHANK CUTTER Z1+1 / 2+2 STEEL BODY PCD H 2,5 MM

PCD shank cutter Z2+2 on top and bottom part Z1+1 in the midle part with PCD tips H2,5 mm resharpened up to 3 times four helicoidal wing, firt tip positive all the others negative, plunge tip in HW, steel body cutting angle 20°. Suitable for working on chipboard panels, playwood, laminated, solid wood, MDF and polymers.

Details View details  

REFILCUT 2 EC3EB FPD2014

PCD HELICOIDAL SHANK CUTTER Z1+1 WITH COPY BEARING STEEL BODY PCD H2,5 MM

PCD shank cutter Z1+1 with copy bearing, eco PCD tips H2,5 mm resharpened up to 3 times three helicoidal wing, firt tip positive all the others negative. Suitable for working on chipboard panels, playwood, laminated, solid wood and MDF.

Details View details  

ECX3 FPD2020

PCD HELICOIDAL SHANK CUTTER Z2+2 STEEL BODY PCD H2,5 MM

PCD shank cutter Z2+2 with eco PCD tips H2,5 mm resharpened up to 3 times three helicoidal wing , firt tip positive all the others negative, plunge tip in HW,cutting angle 20° steel body. Suitable for working on chipboard panels, laminated, solid wood, MDF and polymers.

Details View details  

RX3 FPD2021

PCD HELICOIDAL SHANK CUTTER Z2+2 STEEL BODY PCD H4,5 MM

PCD shank cutter Z2+2 with PCD tips H4,5 mm resharpened up to 8 times three helicoidal wing, firt tip positive all the others negative, plunge tip in PCD, cutting angle 20° steel body. Suitable for working on chipboard panels, laminated, solid wood, MDF and polymers.

Details View details  

ULTRACUT 1 UL FPD2024

PCD HELICOIDAL SHANK CUTTER Z3+3 STEEL BODY PCD H4,5 MM

PCD shank cutter Z3+3 with PCD tips H4,5 mm resharpened up to 8 times three helicoidal wing, firt tip positive all the others negative, plunge tip in PCD, cutting angle 20° steel body. Suitable for working on chipboard panels, laminated, solid wood and MDF.

Details View details  

ULTRACUT 2 ULC FPD2025

PCD HELICOIDAL SHANK CUTTER Z3+3 STEEL BODY PCD H4,5 MM

PCD shank cutter Z3+3 with PCD tips H4,5 mm resharpened up to 8 times three helicoidal wing, tip mainly positive for better evaquaton of wooden chips, plunge tip in PCD, cutting angle 20° steel body. Suitable for working on chipboard panels, laminated and MDF.

Details View details  

STARCUT 1 RX4 FPD2028

PCD HELICOIDAL SHANK CUTTER Z2+2CUTTING ANGLE 30° STEEL BODY PCD H4,5 MM

PCD shank cutter Z2+2 with PCD tips H4,5 mm resharpened up to 8 times four helicoidal wing, firt tip positive all the others negative, plunge tip in PCD, cutting angle 30° steel body. Suitable for working on chipboard panels, playwood, laminated, solid wood and MDF.

Details View details  

STARCUT 2 RX4 FPD2057

PCD HELICOIDAL SHANK CUTTER Z2+2CUTTING ANGLE 30° STEEL BODY PCD H4,5 MM FIRST PCD TIP POSITIVE 5 MM FOR SMALL THICKNESS

PCD shank cutter Z2+2 with PCD tips H4,5 mm resharpened up to 8 times four helicoidal wing, firt tip positive all the others negative, plunge tip in PCD, cutting angle 30° steel body. Suitable for working on chipboard panels, playwood, laminated, solid wood and MDF.

Details View details  

STARCUT 3 RX4C FPD2029

PCD HELICOIDAL SHANK CUTTER Z2+2 CUTTING ANGLE 30° STEEL BODY PCD H4,5 MM

PCD shank cutter Z2+2 with PCD tips H4,5 mm resharpened up to 8 times four helicoidal wing, tip mainly positive for better evaquaton of wooden chips, plunge tip in PCD, cutting angle 30° steel body. Suitable for working on chipboard panels, playwood, laminated, solid wood and MDF.

Details View details  

STARCUT 4 RX4S FPD2033

PCD HELICOIDAL SHANK CUTTER Z2+2 CUTTING ANGLE 45° STEEL BODY PCD H4,5 MM

PCD shank cutter Z2+2 with PCD tips H4,5 mm resharpened up to 8 times four helicoidal wing, firt tip positive all the others negative, plunge tip in PCD, cutting angle 45° steel body. Suitable for working on chipboard panels, playwood, laminated, solid wood and MDF.

Details View details  

STARCUT 5 RX4SC FPD2034

PCD HELICOIDAL SHANK CUTTER Z2+2 CUTTING ANGLE 45° STEEL BODY PCD H4,5 MM

PCD shank cutter Z2+2 with PCD tips H4,5 mm resharpened up to 8 times four helicoidal wing, tip mainly positive for better evaquaton of wooden chips, plunge tip in PCD, cutting angle 30° steel body. Suitable for working on chipboard panels, playwood, laminated, solid wood and MDF.

Details View details  

STARCUT 8 FPD2064

PCD HELICOIDAL CHIP BREAKER SHANK CUTTER Z 2+2 AXIAL 30° HDM BODY

PCD Shank cutter Z2+2 , with resharpenable tips, 4 helix divisions, all positive with chip breaker made by laser machine. Diamond plung tip , heavy metal body, 30 ° axial angle. Excellent for roughing coated MDF   panels, coated multilayer, hardwoods without knots to replace the classic helical chipbreaker cutters.

Details View details  

EXTREME 1 REX2 FPD2036

PCD HELICOIDAL SHANK CUTTER Z2+2 CUTTING ANGLE 54,9° STEEL BODY PCD H4,5 MM

PCD shank cutter Z2+2 mm with PCD tips H4,5 mm resharpened up to 8 times four helicoidal wing, firt tip positive all the others negative, plunge tip in PCD, cutting angle 54,9° steel body. Suitable for working high-performance jointing and sizing of solid woods (free of knots) along and accross the grain, jointing of melamine, paper, HPL laminated, foiled and veneered panels and lacquered surfaces, on chipboard, playwood, laminated and MDF.

Details View details  

AIRCUT 1 RX6 FPD2030

PCD HELICOIDAL SHANK CUTTER Z3+3 CUTTING ANGLE 30° STEEL BODY PCD H4,5 MM

PCD shank cutter Z3+3 with PCD tips H4,5 mm resharpened up to 8 times four helicoidal wing, firt tip positive all the others negative, plunge tip in PCD, cutting angle 30° steel body. Suitable for working on chipboard panels, playwood, laminated, solid wood and MDF.

Details View details  

POWERCUT 5 FPD2040

PCD HELICOIDAL SHANK CUTTER Z2+2 CUTTING ANGLE 25° hdm body PCD H3,5 MM

PCD shank cutter Z2+2 for nesting, with PCD tips H3,5 mm resharpened up to 3 times, two helicoidal wing, firt tip positive all the others negative, plunge tip in PCD, cutting angle 25°, HDM (High density metal) and steel body.

Details View details  

POWERCUT 5A FPD2054

PCD HELICOIDAL SHANK CUTTER Z2+2 CUTTING ANGLE 25° STEEL body PCD H3,5 MM

PCD shank cutter Z2+2 for nesting, with PCD tips H3,5 mm resharpened up to 3 times, two helicoidal wing, firt tip positive all the others negative, plunge tip in PCD, cutting angle 25°, steel body.

Details View details  

POWERCUT 4N FPD2041

PCD HELICOIDAL SHANK CUTTER FOR NESTING Z3+3 HDM BODY

Re-sharpening shank cutter with split tips on three helicoidal wings, three engaged cutters on top and bottom parts, mainly negative helix, HDM body, PCD H3,5 mm. Tool suitable for nesting operation, cutters positive/negative, high working speed, good evaquation of chips, excellent finishing and low noise.

Details View details  

POWERCUT 4NA FPD2058

PCD HELICOIDAL SHANK CUTTER FOR NESTING Z3+3 STEEL BODY

Re-sharpening shank cutter with split tips on three helicoidal wings, three engaged cutters on top and bottom parts, mainly negative helix, STEEL body, PCD H3,5 mm. Tool suitable for nesting operation, cutters positive/negative, high working speed, good evaquation of chips, excellent finishing and low noise.

Details View details  

POWERCUT 4P FPD2042

PCD HELICOIDAL SHANK CUTTER FOR NESTING Z3+3 PCD H3,5 MM, HDM BODY

Re-sharpening shank cutter with split tips on three helicoidal wings, three engaged cutters on top and bottom parts, mainly positive helix, HDM (High density metal) body, PCD H3,5 mm. Tool suitable for nesting, cutters positive/negative, high working speed, good evaquation of chips, excellent finishing and low noise.

Details View details