JOINTING WITH SHANK

FULLCUT 5 EC2A FPD2009

PCD SHANK CUTTER STRAIGHT CUT Z2 STEEL BODY

PCD shank cutter with straight cut Z2 steel body. Suitable for working on chipboard panels, playwood, laminated, solid wood, corian-polymers and MDF.

Details View details  

FULLCUT 1 EC1H FPD2001

PCD SHANK CUTTER STRAIGHT CUT Z1 HW BODY

PCD shank cutter with straight cut Z1 carbide body. Suitable for working on chipboard panels, playwood, laminated, solid wood, corian-polymers and MDF.

Details View details  

FULLCUT 3 EC2H FPD2004

PCD SHANK CUTTER STRAIGHT CUT Z2 HW BODY

PCD shank cutter with straight cut Z2 carbide body. Suitable for working on chipboard panels, playwood, laminated, solid wood, corian-polymers and MDF.

Details View details  

FULLCUT 7 EC2HPN FPD2046

PCD SHANK CUTTER WITH ALTER. CUT POS/NEG Z2 HW BODY

PCD shank cutter with alt. cut Z2 (1 positive cut - 1 negative cut) plung tip in PCD carbide body. Suitable for working on compact material HDF HPL corian carbon fiber and trespa.

Details View details  

POWERCUT 2 FPD2038

PCD SHANK CUTTER WITH ALTERNATE CUT POS./NEG. Z2 HDM BODY WITH ROUGH/FINISCHING CUTTING TIPS

Re-sharpening shank cutter in diamond with full tips, cutting angle (1 positive - 1 negative), rough/finishing cutting tips PCD 3,0 mm, HDM body, tool suitable for nesting operation on MDF, HDF, HPL, panels also in carbon fibre, trespa and corian.

Details View details  

POWERCUT 3 FPD2039

PCD SHANK CUTTER WITH ALTERNATE CUT POS./NEG. Z4 HDM BODY WITH ROUGH/FINISCHING CUTTING TIPS

Re-sharpening shank cutter with full tips, cutting angle (2 posive - 2 negative), rough/finishing cutting tips PCD 3,0 mm, HDM body, tool suitable for nesting operation on MDF, HDF, HPL, panels also in carbon fibre, trespa and corian.

Details View details  

ECOCUT 1 EC2E FPD2011

PCD HELICOIDAL SHANK CUTTER Z1+1 PCD H2,5 MM

PCD shank cutter Z1+1 with eco PCD tips H2,5mm resharpened up to 3 times two helicoidal wing, firt tip positive all the others negative, plunge tip in HW steel body or HDM body. Suitable for working on chipboard panels, playwood, laminated, solid wood and MDF.

Details View details  

ECOCUT 2 EC2EH HDM FPD2053

PCD HELICOIDAL SHANK CUTTER Z1+1 PCD H2,5 MM

PCD shank cutter Z1+1 with eco PCD tips H2,5mm resharpened up to 3 times two helicoidal wing, firt tip positive all the others negative, plunge tip in DIA steel body or HDM body. Suitable for working on chipboard panels, playwood, laminated, solid wood and MDF.

Details View details  

ECOCUT 3 EC3E FPD2012

PCD HELICOIDAL SHANK CUTTER Z1+1 STEEL BODY PCD H2,5 MM

PCD shank cutter Z1+1 with eco PCD tips H2,5 mm resharpened up to 3 times three helicoidal wing, firt tip positive all the others negative, plunge tip in HW, steel body.

Details View details  

ECOCUT PLUS 1 RC3 FPD2013

PCD HELICOIDAL SHANK CUTTER Z1+1 STEEL BODY PCD H4,5 mm

PCD shank cutter Z1+1 with eco PCD tips H4,5 mm resharpened up to 8 times three helicoidal wing, firt tip positive all the others negative, plunge tip in HW steel body. Suitable for working on chipboard panels, playwood, laminated, solid wood and MDF.

Details View details  

ECOCUT 5 EC3H FPD2045

PCD HELICOIDAL SHANK CUTTER Z1+1 HW BODY PCD H2,5 MM

PCD shank cutter Z1+1 with eco PCD tips H2,5 mm resharpened up to 3 times three helicoidal wing, firt tip positive all the others negative, plunge tip in HW, HW body.

Details View details  

ECOCUT 6 EC4E FPD2015

PCD HELICOIDAL SHANK CUTTER Z2+2 STEEL BODY PCD H2,5 MM

PCD shank cutter Z2+2 with PCD tips H2,5 mm, 4 helicoidal wing, firt tip positive all the others negative, plunge tip in HW steel body cutting angle 20°. Suitable for working on chipboard panels, playwood, laminated, solid wood and MDF.

Details View details  

ECOCUT PLUS 2 RC4 FPD2016

PCD HELICOIDAL SHANK CUTTER Z2+2 STEEL BODY PCD H4,5 MM

PCD shank cutter Z2+2 with PCD tips H4,5 mm resharpened up to 8 times four helicoidal wing, firt tip positive all the others negative, plunge tip in HW steel body cutting angle 20°. Suitable for working on chipboard panels, playwood, laminated, solid wood, MDF and polymers.

Details View details  

ECOCUT 8 EC4S FPD2017

PCD HELICOIDAL SHANK CUTTER Z1+1 / 2+2 STEEL BODY PCD H 2,5 MM

PCD shank cutter Z2+2 on top and bottom part Z1+1 in the midle part with PCD tips H2,5 mm resharpened up to 3 times four helicoidal wing, firt tip positive all the others negative, plunge tip in HW, steel body cutting angle 20°. Suitable for working on chipboard panels, playwood, laminated, solid wood, MDF and polymers.

Details View details  

ECX3 FPD2020

PCD HELICOIDAL SHANK CUTTER Z2+2 STEEL BODY PCD H2,5 MM

PCD shank cutter Z2+2 with eco PCD tips H2,5 mm resharpened up to 3 times three helicoidal wing , firt tip positive all the others negative, plunge tip in HW,cutting angle 20° steel body. Suitable for working on chipboard panels, laminated, solid wood, MDF and polymers.

Details View details  

RX3 FPD2021

PCD HELICOIDAL SHANK CUTTER Z2+2 STEEL BODY PCD H4,5 MM

PCD shank cutter Z2+2 with PCD tips H4,5 mm resharpened up to 8 times three helicoidal wing, firt tip positive all the others negative, plunge tip in PCD, cutting angle 20° steel body. Suitable for working on chipboard panels, laminated, solid wood, MDF and polymers.

Details View details  

ULTRACUT 1 UL FPD2024

PCD HELICOIDAL SHANK CUTTER Z3+3 STEEL BODY PCD H4,5 MM

PCD shank cutter Z3+3 with PCD tips H4,5 mm resharpened up to 8 times three helicoidal wing, firt tip positive all the others negative, plunge tip in PCD, cutting angle 20° steel body. Suitable for working on chipboard panels, laminated, solid wood and MDF.

Details View details  

ULTRACUT 2 ULC FPD2025

PCD HELICOIDAL SHANK CUTTER Z3+3 STEEL BODY PCD H4,5 MM

PCD shank cutter Z3+3 with PCD tips H4,5 mm resharpened up to 8 times three helicoidal wing, tip mainly positive for better evaquaton of wooden chips, plunge tip in PCD, cutting angle 20° steel body. Suitable for working on chipboard panels, laminated and MDF.

Details View details  

STARCUT 1 RX4 FPD2028

PCD HELICOIDAL SHANK CUTTER Z2+2CUTTING ANGLE 30° STEEL BODY PCD H4,5 MM

PCD shank cutter Z2+2 with PCD tips H4,5 mm resharpened up to 8 times four helicoidal wing, firt tip positive all the others negative, plunge tip in PCD, cutting angle 30° steel body. Suitable for working on chipboard panels, playwood, laminated, solid wood and MDF.

Details View details  

STARCUT 2 RX4 FPD2057

PCD HELICOIDAL SHANK CUTTER Z2+2CUTTING ANGLE 30° STEEL BODY PCD H4,5 MM FIRST PCD TIP POSITIVE 5 MM FOR SMALL THICKNESS

PCD shank cutter Z2+2 with PCD tips H4,5 mm resharpened up to 8 times four helicoidal wing, firt tip positive all the others negative, plunge tip in PCD, cutting angle 30° steel body. Suitable for working on chipboard panels, playwood, laminated, solid wood and MDF.

Details View details  

STARCUT 3 RX4C FPD2029

PCD HELICOIDAL SHANK CUTTER Z2+2 CUTTING ANGLE 30° STEEL BODY PCD H4,5 MM

PCD shank cutter Z2+2 with PCD tips H4,5 mm resharpened up to 8 times four helicoidal wing, tip mainly positive for better evaquaton of wooden chips, plunge tip in PCD, cutting angle 30° steel body. Suitable for working on chipboard panels, playwood, laminated, solid wood and MDF.

Details View details  

STARCUT 4 RX4S FPD2033

PCD HELICOIDAL SHANK CUTTER Z2+2 CUTTING ANGLE 45° STEEL BODY PCD H4,5 MM

PCD shank cutter Z2+2 with PCD tips H4,5 mm resharpened up to 8 times four helicoidal wing, firt tip positive all the others negative, plunge tip in PCD, cutting angle 45° steel body. Suitable for working on chipboard panels, playwood, laminated, solid wood and MDF.

Details View details  

STARCUT 5 RX4SC FPD2034

PCD HELICOIDAL SHANK CUTTER Z2+2 CUTTING ANGLE 45° STEEL BODY PCD H4,5 MM

PCD shank cutter Z2+2 with PCD tips H4,5 mm resharpened up to 8 times four helicoidal wing, tip mainly positive for better evaquaton of wooden chips, plunge tip in PCD, cutting angle 30° steel body. Suitable for working on chipboard panels, playwood, laminated, solid wood and MDF.

Details View details  

EXTREME 1 REX2 FPD2036

PCD HELICOIDAL SHANK CUTTER Z2+2 CUTTING ANGLE 54,9° STEEL BODY PCD H4,5 MM

PCD shank cutter Z2+2 mm with PCD tips H4,5 mm resharpened up to 8 times four helicoidal wing, firt tip positive all the others negative, plunge tip in PCD, cutting angle 54,9° steel body. Suitable for working high-performance jointing and sizing of solid woods (free of knots) along and accross the grain, jointing of melamine, paper, HPL laminated, foiled and veneered panels and lacquered surfaces, on chipboard, playwood, laminated and MDF.

Details View details  

AIRCUT 1 RX6 FPD2030

PCD HELICOIDAL SHANK CUTTER Z3+3 CUTTING ANGLE 30° STEEL BODY PCD H4,5 MM

PCD shank cutter Z3+3 with PCD tips H4,5 mm resharpened up to 8 times four helicoidal wing, firt tip positive all the others negative, plunge tip in PCD, cutting angle 30° steel body. Suitable for working on chipboard panels, playwood, laminated, solid wood and MDF.

Details View details  

POWERCUT 5 FPD2040

PCD HELICOIDAL SHANK CUTTER Z2+2 CUTTING ANGLE 25° hdm body PCD H3,5 MM

PCD shank cutter Z2+2 for nesting, with PCD tips H3,5 mm resharpened up to 3 times, two helicoidal wing, firt tip positive all the others negative, plunge tip in PCD, cutting angle 25°, HDM (High density metal) and steel body.

Details View details  

POWERCUT 5A FPD2054

PCD HELICOIDAL SHANK CUTTER Z2+2 CUTTING ANGLE 25° STEEL body PCD H3,5 MM

PCD shank cutter Z2+2 for nesting, with PCD tips H3,5 mm resharpened up to 3 times, two helicoidal wing, firt tip positive all the others negative, plunge tip in PCD, cutting angle 25°, steel body.

Details View details  

POWERCUT 4N FPD2041

PCD HELICOIDAL SHANK CUTTER FOR NESTING Z3+3 HDM BODY

Re-sharpening shank cutter with split tips on three helicoidal wings, three engaged cutters on top and bottom parts, mainly negative helix, HDM body, PCD H3,5 mm. Tool suitable for nesting operation, cutters positive/negative, high working speed, good evaquation of chips, excellent finishing and low noise.

Details View details  

POWERCUT 4NA FPD2058

PCD HELICOIDAL SHANK CUTTER FOR NESTING Z3+3 STEEL BODY

Re-sharpening shank cutter with split tips on three helicoidal wings, three engaged cutters on top and bottom parts, mainly negative helix, STEEL body, PCD H3,5 mm. Tool suitable for nesting operation, cutters positive/negative, high working speed, good evaquation of chips, excellent finishing and low noise.

Details View details  

POWERCUT 4P FPD2042

PCD HELICOIDAL SHANK CUTTER FOR NESTING Z3+3 PCD H3,5 MM, HDM BODY

Re-sharpening shank cutter with split tips on three helicoidal wings, three engaged cutters on top and bottom parts, mainly positive helix, HDM (High density metal) body, PCD H3,5 mm. Tool suitable for nesting, cutters positive/negative, high working speed, good evaquation of chips, excellent finishing and low noise.

Details View details  

POWERCUT 8N FPD2059

PCD HELICOIDAL SHANK CUTTER FOR NESTING Z2+2 HDM body

Re-sharpening shank cutter with split tips on six helicoidal wings, three engaged cutters on top and bottom parts, mainly negative helix, HDM (High density metal) body, PCD 3,5 mm. Tool suitable for nesting operation on chipboard panels laminate, coated or on MDF, OSB, cutters positive/negative, high working speed, good evaquation of chips, excellent finishing and low noise.

Details View details  

POWERCUT 6N FPD2043

PCD HELICOIDAL SHANK CUTTER FOR NESTING Z3+3 HDM (HIGH DENSITY METAL) BODY PCD H3,5 MM, MAINLY NEGATIVE

Re-sharpening shank cutter with split tips on six helicoidal wings, three engaged cutters on top and bottom parts, mainly negative helix, HDM (High density metal) body, PCD 3,5 mm. Tool suitable for nesting operation on chipboard panels laminate, coated or on MDF, OSB, cutters positive/negative, high working speed, good evaquation of chips, excellent finishing and low noise.

Details View details  

STARCUT 6 RX4B FPD2048

PCD HELICOIDAL SHANK CUTTERS Z2+2 DOUBLE ROTATION

PCD helicoidal shank cutter Z2+2 double rotation LH/RH with PCD tips H4,5 mm resharpened up to 8 times, four helicoidal wing, firt tip positive all the others negative, plunge tip in PCD steel body cutting angle 30°. Suitable for working on laminated chipboard panels, playwood, laminated and laminated MDF.

Details View details  

ULTRACUT 3 ULB FPD2049

PCD HELICOIDAL SHANK CUTTERS Z3+3 DOUBLE ROTATION

PCD helicoidal shank cutter Z3+3 double rotation LH/RH with PCD tips H4,5 mm resharpened up to 8 times, three helicoidal wing, plunge tip in PCD steel body cutting angle 20°. Suitable for working on laminated chipboard panels and laminated MDF.

Details View details  

STARCUT 7 TRPE FPD2050

PCD RECTIFYING SHANK CUTTERS Z4+4 CUTTING ANGLE 40°

PCD rectifying shank cutter Z4+4 with PCD tips H4,5 mm resharpened up to 8 times, eight helicoidal wing, cutting angle 40°. Suitable for working on laminated chipboard panels, laminated MDF and laminated playwood.

Details View details  

EXTREME 2 TRPX FPD2060

PCD RECTIFY SHANK CUTTERS Z3+3 CUTTING ANGLE 54,9°

PCD rectifying shank cutter Z3+3 with PCD tips H4,5 mm resharpened up to 6 times, cutting angle 54,9°. Suitable for working on laminated chipboard panels, laminated MDF and laminated playwood.

Details View details  

FINISH 1 FPD2501

HW MILLING CUTTERS Z1 POSITIVE

HW milling cutters Z1 positive. Suitable for routing, cutting and profiling on solid wood, laminated chipboard panels and plastic material.

Details View details  

FINISH 2 FPD2502

HW MILLING CUTTERS Z1 NEGATIVE

HW milling cutters Z1 positive. Suitable for routing, cutting and profiling on solid wood, laminated chipboard panels and plastic material.

Details View details  

FINISH 3 FPD2503

HW MILLING CUTTERS Z2 POSITIVE

HW milling cutters Z2 positive. Suitable for routing, cutting and profiling on solid wood, laminated chipboard panels and plastic material.

Details View details  

FINISH 4 FPD2504

HW MILLING CUTTERS Z2 NEGATIVE

HW milling cutters Z2 negative. Suitable for routing, cutting and profiling on solid wood, laminated chipboard panels and plastic material.

Details View details  

FINISH 5 FPD2505

HW milling cutters Z3 positive

HW milling cutters Z3 positive. Suitable for routing, cutting and profiling on solid wood, laminated chipboard panels and plastic material.

Details View details  

FINISH 6 FPD2507

HW MILLING CUTTERS Z3 NEGATIVE

HW milling cutters Z3 negativo for roughing. Suitable for routing, cutting and profiling on solid wood, laminated chipboard panels and plastic material.

Details View details  

FINISH 9 FPD2514

HW DOUBLE ACTION MILLING CUTTERS Z2+2 POSITIVE / NEGATIVE

Helicoidal solid carbite router Z2+2 with positive/negative spiral cut. Suitable for routing, cutting and shape the panels on solid wood, chipboard and plastic materials. 

Details View details  

POWERCUT 7W FPD2516

HW DOUBLE ACTION MILLING CUTTERS FOR HIGH SPEED NESTING Z2+2 POSITIVE/NEGATIVE

Solid carbite high speed router Z2+2 with positive/negative spiral cut. Suitable for nesting operation and also routing, cutting and shape the panels on solid wood, chipboard, MDF and playwood material.

Details View details  

RAPTOR 1 FPD2506

HW MILLING CUTTERS Z3 POSITIVE

HW milling cutters Z3 positive for roughing.Suitable for routing, cutting and profiling on solid wood, laminated chipboard panels and plastic material.

Details View details  

RAPTOR 2 FPD2508

HW MILLING CUTTERS Z3 NEGATIVE

HW milling cutters Z3 negativo for roughing. Suitable for routing, cutting and profiling on solid wood, laminated chipboard panels and plastic material.

Details View details  

FINISH 12 FPD2520

HELICOIDAL HW SHANK CUTTER Z3 POSITIVE WITH FINISHING CHIPS BREAKERS

Helicoidal HW shank cutter Z3 positive with finishing chips breakers. Suitable for rounding, sizing and profiling custom-made hardwood and derivatives, laminated panels and plastic materials.

Details View details  

FINISH 11 FPD2519

HELICOIDAL HW SHANK CUTTER Z2 SPHERICAL FINISHING

Helicoidal HW shank cutter Z2 positive spherical finishing. Suitable for working spherical surfaces.

Details View details  

STARCUT 9 FPD2063

PCD HELICOIDAL SHANK CUTTER MAINLY NEGATIVE AND TIP AT THE BOTTOM

Diamond shank cutter with H4.5mm resharpenable tips (max 8 regrindings), predominantly negative axiality excellent for  aking rebating thanks to the cutting edge tips at the bottom. 40 ° axial angle. Also ideal for rectifying the edges of coated chipboard panels, coated MDF, coated plywood.

Details View details  

VARIO 3 FPS3502

ADJUSTABLE CUTTER WITH INTERCHANGEABLE HW KNIFE 90°

Disposable insert router cutter complete with two cutting flutes Z2. Suitable for producing chamfer cuts at various angles in softwood, hardwood and other materials. Cutting angle can be adjusted steps by using a notched scale. Fine adjustment of 1° is also possible. For use on machining centers with CNC control.

Details View details  

VARIO 2 FPS3503

ADJUSTABLE CUTTER WITH INTERCHANGEABLE HW KNIFE 135°

Disposable insert router cutter complete with two cutting flutes Z2. Suitable for producing chamfer cuts at various angles in softwood, hardwood and other materials. Cutting angle can be adjusted steps by using a notched scale. For use on machining centers with CNC control.

Details View details  

FPD2527

ROUTER BITS WITH INSERT KNIVES, WITH CUTTING INSERT IN THE HEAD TOOLS

Details View details