GROOVE BLADES

FULLCUT 1 EC1H FPD2001

PCD SHANK CUTTER STRAIGHT CUT Z1 HW BODY

PCD shank cutter with straight cut Z1 carbide body. Suitable for working on chipboard panels, playwood, laminated, solid wood, corian-polymers and MDF.

Details View details

FULLCUT 2 EC1HN FPD2003

PCD SHANK CUTTER NEGATIVE CUT Z1 HW BODY

PCD shank cutter with negative cut Z1 carbide body. Suitable for grooving with excellent finishing on the panel surface to be used for working on chipboard panel, laminated and MDF.

Details View details

FULLCUT 3 EC2H FPD2004

PCD SHANK CUTTER STRAIGHT CUT Z2 HW BODY

PCD shank cutter with straight cut Z2 carbide body. Suitable for working on chipboard panels, playwood, laminated, solid wood, corian-polymers and MDF.

Details View details

FULLCUT 4 EC2HN FPD2006

PCD SHANK CUTTER NEGATIVE CUT Z2 HW BODY

PCD shank cutter with negative cut Z2 carbide body. Suitable for grooving with excellent finishing on the panel surface to be used for working on chipboard panel, laminated and MDF.

Details View details

FULLCUT 5 EC2A FPD2009

PCD SHANK CUTTER STRAIGHT CUT Z2 STEEL BODY

PCD shank cutter with straight cut Z2 steel body. Suitable for working on chipboard panels, playwood, laminated, solid wood, corian-polymers and MDF.

Details View details

FULLCUT 6 EC2AN FPD2010

PCD SHANK CUTTER negative CUT Z2 STEEL BODY

PCD shank cutter with negative cut Z2 steel body. Suitable for working on chipboard panels, playwood, laminated, solid wood, corian-polymers and MDF.

Details View details

POWERCUT 3 FPD2039

PCD SHANK CUTTER WITH ALTERNATE CUT POS./NEG. Z4 HDM BODY WITH ROUGH/FINISCHING CUTTING TIPS

Re-sharpening shank cutter with full tips, cutting angle (2 posive - 2 negative), rough/finishing cutting tips PCD 3,0 mm, HDM body, tool suitable for nesting operation on MDF, HDF, HPL, panels also in carbon fibre, trespa and corian.

Details View details

ECOCUT 1 EC2E FPD2011

PCD HELICOIDAL SHANK CUTTER Z1+1 PCD H2,5 MM

PCD shank cutter Z1+1 with eco PCD tips H2,5mm resharpened up to 3 times two helicoidal wing, firt tip positive all the others negative, plunge tip in HW steel body or HDM body. Suitable for working on chipboard panels, playwood, laminated, solid wood and MDF.

Details View details

ECOCUT 3 EC3E FPD2012

PCD HELICOIDAL SHANK CUTTER Z1+1 STEEL BODY PCD H2,5 MM

PCD shank cutter Z1+1 with eco PCD tips H2,5 mm resharpened up to 3 times three helicoidal wing, firt tip positive all the others negative, plunge tip in HW, steel body.

Details View details

ECOCUT PLUS 1 RC3 FPD2013

PCD HELICOIDAL SHANK CUTTER Z1+1 STEEL BODY PCD H4,5 mm

PCD shank cutter Z1+1 with eco PCD tips H4,5 mm resharpened up to 8 times three helicoidal wing, firt tip positive all the others negative, plunge tip in HW steel body. Suitable for working on chipboard panels, playwood, laminated, solid wood and MDF.

Details View details

ECOCUT 6 EC4E FPD2015

PCD HELICOIDAL SHANK CUTTER Z2+2 STEEL BODY PCD H2,5 MM

PCD shank cutter Z2+2 with PCD tips H2,5 mm, 4 helicoidal wing, firt tip positive all the others negative, plunge tip in HW steel body cutting angle 20°. Suitable for working on chipboard panels, playwood, laminated, solid wood and MDF.

Details View details

ECOCUT PLUS 2 RC4 FPD2016

PCD HELICOIDAL SHANK CUTTER Z2+2 STEEL BODY PCD H4,5 MM

PCD shank cutter Z2+2 with PCD tips H4,5 mm resharpened up to 8 times four helicoidal wing, firt tip positive all the others negative, plunge tip in HW steel body cutting angle 20°. Suitable for working on chipboard panels, playwood, laminated, solid wood, MDF and polymers.

Details View details

STARCUT 1 RX4 FPD2028

PCD HELICOIDAL SHANK CUTTER Z2+2CUTTING ANGLE 30° STEEL BODY PCD H4,5 MM

PCD shank cutter Z2+2 with PCD tips H4,5 mm resharpened up to 8 times four helicoidal wing, firt tip positive all the others negative, plunge tip in PCD, cutting angle 30° steel body. Suitable for working on chipboard panels, playwood, laminated, solid wood and MDF.

Details View details

STARCUT 4 RX4S FPD2033

PCD HELICOIDAL SHANK CUTTER Z2+2 CUTTING ANGLE 45° STEEL BODY PCD H4,5 MM

PCD shank cutter Z2+2 with PCD tips H4,5 mm resharpened up to 8 times four helicoidal wing, firt tip positive all the others negative, plunge tip in PCD, cutting angle 45° steel body. Suitable for working on chipboard panels, playwood, laminated, solid wood and MDF.

Details View details

POWERCUT 5 FPD2040

PCD HELICOIDAL SHANK CUTTER Z2+2 CUTTING ANGLE 25° hdm body PCD H3,5 MM

PCD shank cutter Z2+2 for nesting, with PCD tips H3,5 mm resharpened up to 3 times, two helicoidal wing, firt tip positive all the others negative, plunge tip in PCD, cutting angle 25°, HDM (High density metal) and steel body.

Details View details

POWERCUT 4N FPD2041

PCD HELICOIDAL SHANK CUTTER FOR NESTING Z3+3 HDM BODY

Re-sharpening shank cutter with split tips on three helicoidal wings, three engaged cutters on top and bottom parts, mainly negative helix, HDM body, PCD H3,5 mm. Tool suitable for nesting operation, cutters positive/negative, high working speed, good evaquation of chips, excellent finishing and low noise.

Details View details

POWERCUT 6N FPD2043

PCD HELICOIDAL SHANK CUTTER FOR NESTING Z3+3 HDM (HIGH DENSITY METAL) BODY PCD H3,5 MM, MAINLY NEGATIVE

Re-sharpening shank cutter with split tips on six helicoidal wings, three engaged cutters on top and bottom parts, mainly negative helix, HDM (High density metal) body, PCD 3,5 mm. Tool suitable for nesting operation on chipboard panels laminate, coated or on MDF, OSB, cutters positive/negative, high working speed, good evaquation of chips, excellent finishing and low noise.

Details View details

ECOCUT 5 EC3H FPD2045

PCD HELICOIDAL SHANK CUTTER Z1+1 HW BODY PCD H2,5 MM

PCD shank cutter Z1+1 with eco PCD tips H2,5 mm resharpened up to 3 times three helicoidal wing, firt tip positive all the others negative, plunge tip in HW, HW body.

Details View details

ECOCUT 2 EC2EH HDM FPD2053

PCD HELICOIDAL SHANK CUTTER Z1+1 PCD H2,5 MM

PCD shank cutter Z1+1 with eco PCD tips H2,5mm resharpened up to 3 times two helicoidal wing, firt tip positive all the others negative, plunge tip in DIA steel body or HDM body. Suitable for working on chipboard panels, playwood, laminated, solid wood and MDF.

Details View details

POWERCUT 5A FPD2054

PCD HELICOIDAL SHANK CUTTER Z2+2 CUTTING ANGLE 25° STEEL body PCD H3,5 MM

PCD shank cutter Z2+2 for nesting, with PCD tips H3,5 mm resharpened up to 3 times, two helicoidal wing, firt tip positive all the others negative, plunge tip in PCD, cutting angle 25°, steel body.

Details View details

STARCUT 2 RX4 FPD2057

PCD HELICOIDAL SHANK CUTTER Z2+2CUTTING ANGLE 30° STEEL BODY PCD H4,5 MM FIRST PCD TIP POSITIVE 5 MM FOR SMALL THICKNESS

PCD shank cutter Z2+2 with PCD tips H4,5 mm resharpened up to 8 times four helicoidal wing, firt tip positive all the others negative, plunge tip in PCD, cutting angle 30° steel body. Suitable for working on chipboard panels, playwood, laminated, solid wood and MDF.

Details View details

POWERCUT 4NA FPD2058

PCD HELICOIDAL SHANK CUTTER FOR NESTING Z3+3 STEEL BODY

Re-sharpening shank cutter with split tips on three helicoidal wings, three engaged cutters on top and bottom parts, mainly negative helix, STEEL body, PCD H3,5 mm. Tool suitable for nesting operation, cutters positive/negative, high working speed, good evaquation of chips, excellent finishing and low noise.

Details View details

POWERCUT 8N FPD2059

PCD HELICOIDAL SHANK CUTTER FOR NESTING Z2+2 HDM body

Re-sharpening shank cutter with split tips on six helicoidal wings, three engaged cutters on top and bottom parts, mainly negative helix, HDM (High density metal) body, PCD 3,5 mm. Tool suitable for nesting operation on chipboard panels laminate, coated or on MDF, OSB, cutters positive/negative, high working speed, good evaquation of chips, excellent finishing and low noise.

Details View details

STARCUT 9 FPD2063

PCD HELICOIDAL SHANK CUTTER MAINLY NEGATIVE AND TIP AT THE BOTTOM

Diamond shank cutter with H4.5mm resharpenable tips (max 8 regrindings), predominantly negative axiality excellent for aking rebating thanks to the cutting edge tips at the bottom. 40 ° axial angle. Also ideal for rectifying the edges of coated chipboard panels, coated MDF, coated plywood.

Details View details

FINISH 2 FPD2502

HW MILLING CUTTERS Z1 NEGATIVE

HW milling cutters Z1 positive. Suitable for routing, cutting and profiling on solid wood, laminated chipboard panels and plastic material.

Details View details

FINISH 4 FPD2504

HW MILLING CUTTERS Z2 NEGATIVE

HW milling cutters Z2 negative. Suitable for routing, cutting and profiling on solid wood, laminated chipboard panels and plastic material.

Details View details

FINISH 6 FPD2507

HW MILLING CUTTERS Z3 NEGATIVE

HW milling cutters Z3 negativo for roughing. Suitable for routing, cutting and profiling on solid wood, laminated chipboard panels and plastic material.

Details View details

FINISH 9 FPD2514

HW DOUBLE ACTION MILLING CUTTERS Z2+2 POSITIVE / NEGATIVE

Helicoidal solid carbite router Z2+2 with positive/negative spiral cut. Suitable for routing, cutting and shape the panels on solid wood, chipboard and plastic materials.

Details View details

POWERCUT 7W FPD2516

HW DOUBLE ACTION MILLING CUTTERS FOR HIGH SPEED NESTING Z2+2 POSITIVE/NEGATIVE

Solid carbite high speed router Z2+2 with positive/negative spiral cut. Suitable for nesting operation and also routing, cutting and shape the panels on solid wood, chipboard, MDF and playwood material.

Details View details