AIR CUT 2
FFD4041
JOINTING CUTTER WITH PCD INSERTS PCD H2,5 mm AXIAL 30°
Jointing cutter with pcd inserts, PCD H2,5 mm, axial 30°.
SERIES
There are 16 products.
AIR CUT 2
AIR CUT 3
FFD4042
JOINTING CUTTER WITH PCD INSERTS PCD H2,5 mm AXIAL 45°
Jointing cutter with pcd inserts, PCD H2,5 mm, axial 45°.
V CUT 8
FFS5015
HOLE CUTTER WITH HOLE FOR CUTTING PANELS AT 45° WITH POSITIVE NEGATIVE AXIAL ANGLE
Cutter with hole for chamfering panels at 45 ° with positive negative axial angle for excellent surface finishes. To be applied on spindle moulders, edge banding or squaring machines.
DIAFIX 1
FFD4043
PCD INSERTS JOINTING CUTTER WITH CONSTANT DIAMETER
PCD insert jointing cutter PCD H5,5 axial cut 30° . The insert are adjustable to keep a constant diameter after grinding.
TRS 1
FFD4030
DIA ADJUSTABLE JOINTING CUTTER CUTTING ANGLE 30°
Re-sharpening and adjustable jointing cutter in diamond, made in two pieces adjustable by spacer rings, used on squaring machines.
TRS 2
FFD4031
DIA ADJUSTABLE JOINTING CUTTER cutting angle 45°
Re-sharpening and adjustable jointing cutter in diamond, made in two pieces adjustable by spacer rings, used on squaring machines.
TRS 3
FFD4032
DIA ADJUSTABLE JOINTING CUTTER cutting angle 54,9°
Re-sharpening and adjustable jointing cutter in diamond, made in two pieces adjustable by spacer rings, used on squaring machines.
GROOVINGCUT 3
FFD4036
DIA ADJUSTABLE GROOVING CUTTER WITH ADJUSTABLE CHANFERING KNIFE
Re-sharpening adjustable grooving cutter in diamond with adjustable chanfering knife, suitable for grooving on chipboard panels, used on edgebanding machines.
GROOVINGCUT 2
FFD4035
DIA ADJUSTABLE GROOVING CUTTER
Re-sharpening adjustable grooving cutter in diamond, suitable for grooving on chipboard panels, used on edgebanding machines.
New
LIGHT FLEX 1
FFD4026
JOINTING CUTTER WITH PCD INSERTS PCD H3 AXIAL 35°
Jointing cutter with pcd inserts, PCD H3, axial 35°. It’s possible to change the inserts position to have symmetrical and asymmetrical cutter.
LIGHT FLEX 2
FFD4027
JOINTING CUTTER WITH PCD INSERTS PCD H3 AXIAL 45°
Jointing cutter with pcd inserts, PCD H3, axial 45°. It’s possible to change the inserts position to have symmetrical and asymmetrical cutter.
LIGHT FLEX 3
FFD4028
JOINTING CUTTER WITH PCD INSERTS PCD H3 mm AXIAL 54.9°
Jointing cutter with pcd inserts, PCD H3 mm, axial 54.9°. It’s possible to change the inserts position to have symmetrical and asymmetrical cutter.
TRS 5
FFD4034
DIA ADJUSTABLE CHANGEBLE JOINTING CUTTER PROGRESSIVE WITH HYDRO SLEEVE AXIAL 54,9° STEEL BODY