PCD STRAIGHT SHANK CUTTERS

FULLCUT 2 EC1HN FPD2003

PCD SHANK CUTTER NEGATIVE CUT Z1 HW BODY

PCD shank cutter with negative cut Z1 carbide body. Suitable for grooving with excellent finishing on the panel surface to be used for working on chipboard panel, laminated and MDF.


FULLCUT 4 EC2HN FPD2006

PCD SHANK CUTTER NEGATIVE CUT Z2 HW BODY

PCD shank cutter with negative cut Z2 carbide body. Suitable for grooving with excellent finishing on the panel surface to be used for working on chipboard panel, laminated and MDF.


ECOCUT 1 EC2E FPD2011

PCD HELICOIDAL SHANK CUTTER Z1+1 PCD H2,5 MM

PCD shank cutter Z1+1 with eco PCD tips H2,5mm resharpened up to 3 times two helicoidal wing, firt tip positive all the others negative, plunge tip in HW steel body or HDM body. Suitable for working on chipboard panels, playwood, laminated, solid wood and MDF.
ECOCUT 3 EC3E FPD2012

PCD HELICOIDAL SHANK CUTTER Z1+1 STEEL BODY PCD H2,5 MM

PCD shank cutter Z1+1 with eco PCD tips H2,5 mm resharpened up to 3 times three helicoidal wing, firt tip positive all the others negative, plunge tip in HW, steel body.


ECOCUT PLUS 1 RC3 FPD2013

PCD HELICOIDAL SHANK CUTTER Z1+1 STEEL BODY PCD H4,5 mm

PCD shank cutter Z1+1 with eco PCD tips H4,5 mm resharpened up to 8 times three helicoidal wing, firt tip positive all the others negative, plunge tip in HW steel body. Suitable for working on chipboard panels, playwood, laminated, solid wood and MDF.
REFILCUT 2 EC3EB FPD2014

PCD HELICOIDAL SHANK CUTTER Z1+1 WITH COPY BEARING STEEL BODY PCD H2,5 MM

PCD shank cutter Z1+1 with copy bearing, eco PCD tips H2,5 mm resharpened up to 3 times three helicoidal wing, firt tip positive all the others negative. Suitable for working on chipboard panels, playwood, laminated, solid wood and MDF.


ECOCUT 6 EC4E FPD2015

PCD HELICOIDAL SHANK CUTTER Z2+2 STEEL BODY PCD H2,5 MM

PCD shank cutter Z2+2 with PCD tips H2,5 mm, 4 helicoidal wing, firt tip positive all the others negative, plunge tip in HW steel body cutting angle 20°. Suitable for working on chipboard panels, playwood, laminated, solid wood and MDF.


ECOCUT PLUS 2 RC4 FPD2016

PCD HELICOIDAL SHANK CUTTER Z2+2 STEEL BODY PCD H4,5 MM

PCD shank cutter Z2+2 with PCD tips H4,5 mm resharpened up to 8 times four helicoidal wing, firt tip positive all the others negative, plunge tip in HW steel body cutting angle 20°. Suitable for working on chipboard panels, playwood, laminated, solid wood, MDF and polymers.
ECOCUT 8 EC4S FPD2017

PCD HELICOIDAL SHANK CUTTER Z1+1 / 2+2 STEEL BODY PCD H 2,5 MM

PCD shank cutter Z2+2 on top and bottom part Z1+1 in the midle part with PCD tips H2,5 mm resharpened up to 3 times four helicoidal wing, firt tip positive all the others negative, plunge tip in HW, steel body cutting angle 20°. Suitable for working on chipboard panels, playwood, laminated, solid wood, MDF and polymers.
ECX3 FPD2020

PCD HELICOIDAL SHANK CUTTER Z2+2 STEEL BODY PCD H2,5 MM

PCD shank cutter Z2+2 with eco PCD tips H2,5 mm resharpened up to 3 times three helicoidal wing , firt tip positive all the others negative, plunge tip in HW,cutting angle 20° steel body. Suitable for working on chipboard panels, laminated, solid wood, MDF and polymers.
RX3 FPD2021

PCD HELICOIDAL SHANK CUTTER Z2+2 STEEL BODY PCD H4,5 MM

PCD shank cutter Z2+2 with PCD tips H4,5 mm resharpened up to 8 times three helicoidal wing, firt tip positive all the others negative, plunge tip in PCD, cutting angle 20° steel body. Suitable for working on chipboard panels, laminated, solid wood, MDF and polymers.
ULTRACUT 1 UL FPD2024

PCD HELICOIDAL SHANK CUTTER Z3+3 STEEL BODY PCD H4,5 MM

PCD shank cutter Z3+3 with PCD tips H4,5 mm resharpened up to 8 times three helicoidal wing, firt tip positive all the others negative, plunge tip in PCD, cutting angle 20° steel body. Suitable for working on chipboard panels, laminated, solid wood and MDF.
ULTRACUT 2 ULC FPD2025

PCD HELICOIDAL SHANK CUTTER Z3+3 STEEL BODY PCD H4,5 MM

PCD shank cutter Z3+3 with PCD tips H4,5 mm resharpened up to 8 times three helicoidal wing, tip mainly positive for better evaquaton of wooden chips, plunge tip in PCD, cutting angle 20° steel body. Suitable for working on chipboard panels, laminated and MDF.
STARCUT 1 RX4 FPD2028

PCD HELICOIDAL SHANK CUTTER Z2+2CUTTING ANGLE 30° STEEL BODY PCD H4,5 MM

PCD shank cutter Z2+2 with PCD tips H4,5 mm resharpened up to 8 times four helicoidal wing, firt tip positive all the others negative, plunge tip in PCD, cutting angle 30° steel body. Suitable for working on chipboard panels, playwood, laminated, solid wood and MDF.
AIRCUT 1 RX6 FPD2030

PCD HELICOIDAL SHANK CUTTER Z3+3 CUTTING ANGLE 30° STEEL BODY PCD H4,5 MM

PCD shank cutter Z3+3 with PCD tips H4,5 mm resharpened up to 8 times four helicoidal wing, firt tip positive all the others negative, plunge tip in PCD, cutting angle 30° steel body. Suitable for working on chipboard panels, playwood, laminated, solid wood and MDF.
STARCUT 4 RX4S FPD2033

PCD HELICOIDAL SHANK CUTTER Z2+2 CUTTING ANGLE 45° STEEL BODY PCD H4,5 MM

PCD shank cutter Z2+2 with PCD tips H4,5 mm resharpened up to 8 times four helicoidal wing, firt tip positive all the others negative, plunge tip in PCD, cutting angle 45° steel body. Suitable for working on chipboard panels, playwood, laminated, solid wood and MDF.
STARCUT 5 RX4SC FPD2034

PCD HELICOIDAL SHANK CUTTER Z2+2 CUTTING ANGLE 45° STEEL BODY PCD H4,5 MM

PCD shank cutter Z2+2 with PCD tips H4,5 mm resharpened up to 8 times four helicoidal wing, tip mainly positive for better evaquaton of wooden chips, plunge tip in PCD, cutting angle 30° steel body. Suitable for working on chipboard panels, playwood, laminated, solid wood and MDF.
POWERCUT 2 FPD2038

PCD SHANK CUTTER WITH ALTERNATE CUT POS./NEG. Z2 HDM BODY WITH ROUGH/FINISCHING CUTTING TIPS

Re-sharpening shank cutter in diamond with full tips, cutting angle (1 positive - 1 negative), rough/finishing cutting tips PCD 3,0 mm, HDM body, tool suitable for nesting operation on MDF, HDF, HPL, panels also in carbon fibre, trespa and corian.


POWERCUT 3 FPD2039

PCD SHANK CUTTER WITH ALTERNATE CUT POS./NEG. Z4 HDM BODY WITH ROUGH/FINISCHING CUTTING TIPS

Re-sharpening shank cutter with full tips, cutting angle (2 posive - 2 negative), rough/finishing cutting tips PCD 3,0 mm, HDM body, tool suitable for nesting operation on MDF, HDF, HPL, panels also in carbon fibre, trespa and corian.


POWERCUT 5 FPD2040

PCD HELICOIDAL SHANK CUTTER Z2+2 CUTTING ANGLE 25° hdm body PCD H3,5 MM

PCD shank cutter Z2+2 for nesting, with PCD tips H3,5 mm resharpened up to 3 times, two helicoidal wing, firt tip positive all the others negative, plunge tip in PCD, cutting angle 25°, HDM (High density metal) and steel body.


POWERCUT 4N FPD2041

PCD HELICOIDAL SHANK CUTTER FOR NESTING Z3+3 HDM BODY

Re-sharpening shank cutter with split tips on three helicoidal wings, three engaged cutters on top and bottom parts, mainly negative helix, HDM body, PCD H3,5 mm. Tool suitable for nesting operation, cutters positive/negative, high working speed, good evaquation of chips, excellent finishing and low noise.
POWERCUT 4P FPD2042

PCD HELICOIDAL SHANK CUTTER FOR NESTING Z3+3 PCD H3,5 MM, HDM BODY

Re-sharpening shank cutter with split tips on three helicoidal wings, three engaged cutters on top and bottom parts, mainly positive helix, HDM (High density metal) body, PCD H3,5 mm. Tool suitable for nesting, cutters positive/negative, high working speed, good evaquation of chips, excellent finishing and low noise.
POWERCUT 6N FPD2043

PCD HELICOIDAL SHANK CUTTER FOR NESTING Z3+3 HDM (HIGH DENSITY METAL) BODY PCD H3,5 MM, MAINLY NEGATIVE

Re-sharpening shank cutter with split tips on six helicoidal wings, three engaged cutters on top and bottom parts, mainly negative helix, HDM (High density metal) body, PCD 3,5 mm. Tool suitable for nesting operation on chipboard panels laminate, coated or on MDF, OSB, cutters positive/negative, high working speed, good evaquation of chips, excellent finishing and low noise.
ECOCUT 5 EC3H FPD2045

PCD HELICOIDAL SHANK CUTTER Z1+1 HW BODY PCD H2,5 MM

PCD shank cutter Z1+1 with eco PCD tips H2,5 mm resharpened up to 3 times three helicoidal wing, firt tip positive all the others negative, plunge tip in HW, HW body.


FULLCUT 7 EC2HPN FPD2046

PCD SHANK CUTTER WITH ALTER. CUT POS/NEG Z2 HW BODY

PCD shank cutter with alt. cut Z2 (1 positive cut - 1 negative cut) plung tip in PCD carbide body. Suitable for working on compact material HDF HPL corian carbon fiber and trespa.


STARCUT 6 RX4B FPD2048

PCD HELICOIDAL SHANK CUTTERS Z2+2 DOUBLE ROTATION

PCD helicoidal shank cutter Z2+2 double rotation LH/RH with PCD tips H4,5 mm resharpened up to 8 times, four helicoidal wing, firt tip positive all the others negative, plunge tip in PCD steel body cutting angle 30°. Suitable for working on laminated chipboard panels, playwood, laminated and laminated MDF.
ULTRACUT 3 ULB FPD2049

PCD HELICOIDAL SHANK CUTTERS Z3+3 DOUBLE ROTATION

PCD helicoidal shank cutter Z3+3 double rotation LH/RH with PCD tips H4,5 mm resharpened up to 8 times, three helicoidal wing, plunge tip in PCD steel body cutting angle 20°. Suitable for working on laminated chipboard panels and laminated MDF.


AVANTECH 1 FPD2052

PCD HELICOIDAL SHANK CUTTERS Z2+2FOR MACHINING DOOR LOCKS, HDM (HIGH DENSITY METAL) BODY

PCD helicoidal shank cutter Z2+2 for machining door locks with body anti-vibration in HDM (High density metal). The two negative tips give a good finishing during the opetation for the slot the others two positive tips with chip breaker help the evaquation of wooden chips from the slot.
ECOCUT 2 EC2EH HDM FPD2053

PCD HELICOIDAL SHANK CUTTER Z1+1 PCD H2,5 MM

PCD shank cutter Z1+1 with eco PCD tips H2,5mm resharpened up to 3 times two helicoidal wing, firt tip positive all the others negative, plunge tip in DIA steel body or HDM body. Suitable for working on chipboard panels, playwood, laminated, solid wood and MDF.
POWERCUT 5A FPD2054

PCD HELICOIDAL SHANK CUTTER Z2+2 CUTTING ANGLE 25° STEEL body PCD H3,5 MM

PCD shank cutter Z2+2 for nesting, with PCD tips H3,5 mm resharpened up to 3 times, two helicoidal wing, firt tip positive all the others negative, plunge tip in PCD, cutting angle 25°, steel body.


REFILCUT 1 FPD2055

PCD SHANK CUTTER WITH ALTERNATE CUT POSITIVe/NEGATIVe Z2 HW BODY

PCD shank cutter with alt. cut Z2 (1 positive cut - 1 negative cut) plung tip in PCD carbide body. Suitable for working on compact material HDF HPL corian carbon fiber and trespa.