CNC STRAIGHT SHANK CUTTERS

FPD2059
POWERCUT 8N FPD2059

PCD HELICOIDAL SHANK CUTTER FOR NESTING Z2+2 HDM body

Re-sharpening shank cutter with split tips on six helicoidal wings, three engaged cutters on top and bottom parts, mainly negative helix, HDM (High density metal) body, PCD 3,5 mm. Tool suitable for nesting operation on chipboard panels laminate, coated or on MDF, OSB, cutters positive/negative, high working speed, good evaquation of chips, excellent finishing and low noise.
Details View details  
FPD2043
POWERCUT 6N FPD2043

PCD HELICOIDAL SHANK CUTTER FOR NESTING Z3+3 HDM (HIGH DENSITY METAL) BODY PCD H3,5 MM, MAINLY NEGATIVE

Re-sharpening shank cutter with split tips on six helicoidal wings, three engaged cutters on top and bottom parts, mainly negative helix, HDM (High density metal) body, PCD 3,5 mm. Tool suitable for nesting operation on chipboard panels laminate, coated or on MDF, OSB, cutters positive/negative, high working speed, good evaquation of chips, excellent finishing and low noise.
Details View details  
FPD2048
STARCUT 6 RX4B FPD2048

PCD HELICOIDAL SHANK CUTTERS Z2+2 DOUBLE ROTATION

PCD helicoidal shank cutter Z2+2 double rotation LH/RH with PCD tips H4,5 mm resharpened up to 8 times, four helicoidal wing, firt tip positive all the others negative, plunge tip in PCD steel body cutting angle 30°. Suitable for working on laminated chipboard panels, playwood, laminated and laminated MDF.
Details View details  
FPD2049
ULTRACUT 3 ULB FPD2049

PCD HELICOIDAL SHANK CUTTERS Z3+3 DOUBLE ROTATION

PCD helicoidal shank cutter Z3+3 double rotation LH/RH with PCD tips H4,5 mm resharpened up to 8 times, three helicoidal wing, plunge tip in PCD steel body cutting angle 20°. Suitable for working on laminated chipboard panels and laminated MDF.


Details View details  
FPD2050
STARCUT 7 TRPE FPD2050

PCD RECTIFYING SHANK CUTTERS Z4+4 CUTTING ANGLE 40°

PCD rectifying shank cutter Z4+4 with PCD tips H4,5 mm resharpened up to 8 times, eight helicoidal wing, cutting angle 40°. Suitable for working on laminated chipboard panels, laminated MDF and laminated playwood.


Details View details  
FPD2060
EXTREME 2 TRPX FPD2060

PCD RECTIFY SHANK CUTTERS Z3+3 CUTTING ANGLE 54,9°

PCD rectifying shank cutter Z3+3 with PCD tips H4,5 mm resharpened up to 6 times, cutting angle 54,9°. Suitable for working on laminated chipboard panels, laminated MDF and laminated playwood.


Details View details  
FPD2063
STARCUT 9 FPD2063

PCD HELICOIDAL SHANK CUTTER MAINLY NEGATIVE AND TIP AT THE BOTTOM

Diamond shank cutter with H4.5mm resharpenable tips (max 8 regrindings), predominantly negative axiality excellent for  aking rebating thanks to the cutting edge tips at the bottom. 40 ° axial angle. Also ideal for rectifying the edges of coated chipboard panels, coated MDF, coated plywood.
Details View details  
FPD2052
AVANTECH 1 FPD2052

PCD HELICOIDAL SHANK CUTTERS Z2+2FOR MACHINING DOOR LOCKS, HDM (HIGH DENSITY METAL) BODY

PCD helicoidal shank cutter Z2+2 for machining door locks with body anti-vibration in HDM (High density metal). The two negative tips give a good finishing during the opetation for the slot the others two positive tips with chip breaker help the evaquation of wooden chips from the slot.
Details View details  
FPD2062
AVANTECH 3 FPD2062

PCD HELICOIDAL SHANK CUTTERS Z2+2 FOR MACHINING DOOR LOCKS HDM (HIGH DENSITY METAL) BODY

PCD helicoidal shank cutter Z2+2 for machining door locks with body anti-vibration in HDM (High density metal). The two negative tips give a good finishing during the opetation for the slot the others two positive tips with chip breaker help the evaquation of wooden chips from the slot.
Details View details  
FPD2506
RAPTOR 1 FPD2506

HW MILLING CUTTERS Z3 POSITIVE

HW milling cutters Z3 positive for roughing.Suitable for routing, cutting and profiling on solid wood, laminated chipboard panels and plastic material.


Details View details  
FPD2507
FINISH 6 FPD2507

HW MILLING CUTTERS Z3 NEGATIVE

HW milling cutters Z3 negativo for roughing. Suitable for routing, cutting and profiling on solid wood, laminated chipboard panels and plastic material.


Details View details  
FPD2518
AVANTECH 2 FPD2518

HW POSITIVE SHANK CUTTER TO WORK DOOR LOCK SLOT. CHIP BREAKER Z3 WITH NEGATIVE PART FOR BETTER FINSHING OF PLATE HOUSE

HW positive shank cutter to work door lock slot. chip breaker Z3 with negative part for better finshing of plate house. Suitable to realize door lock slot and for routing, cutting on solid wood , laminated chipboard and plastic material.


Details View details  
FPD2508
RAPTOR 2 FPD2508

HW MILLING CUTTERS Z3 NEGATIVE

HW milling cutters Z3 negativo for roughing. Suitable for routing, cutting and profiling on solid wood, laminated chipboard panels and plastic material.


Details View details  
FPD2509
FINISH 7 FPD2509

HW MILLING CUTTERS Z3 POSITIVE FOR MACHINING DOOR LOCKS

Helicoidal solid carbite router Z3 with three positive spiral. Suitable for routing, cutting and profiling on solid wood, laminated chipboard panels and plastic material. Suitable for loocksets by gradualinfeed.


Details View details  
FPD2510
RAPTOR 3 FPD2510

HW MILLING CUTTERS FOR MACHINING DOOR LOCKS FOR ROUGHING Z3 POSITIVE

HW milling cutters for finishing Z3 positive for roughing. Suitable for routing, cutting and profiling on solid wood, laminated chipboard panels and plastic material. Suitable for loocksets by gradualinfeed.


Details View details  
FPD2511
FINISH 8 FPD2511

HW MILLING CUTTERS Z3 NEGATIVE FOR MACHINING DOOR LOCKS

HW milling cutters Z3 negative. Suitable for routing, cutting and profiling on solid wood, laminated chipboard panels and plastic material. Suitable for loocksets by gradualinfeed.


Details View details  
FPD2512
RAPTOR 4 FPD2512

HW MILLING CUTTERS FOR MACHINING DOOR LOCKS FOR ROUGHING Z3 NEGATIVE

HW milling cutters for finishing Z3 negative for roughing. Suitable for routing, cutting and profiling on solid wood, laminated chipboard panels and plastic material. Suitable for loocksets by gradualinfeed.


Details View details  
FPD2514
FINISH 9 FPD2514

HW DOUBLE ACTION MILLING CUTTERS Z2+2 POSITIVE / NEGATIVE

Helicoidal solid carbite router Z2+2 with positive/negative spiral cut. Suitable for routing, cutting and shape the panels on solid wood, chipboard and plastic materials. 


Details View details  
FPD2516
POWERCUT 7W FPD2516

HW DOUBLE ACTION MILLING CUTTERS FOR HIGH SPEED NESTING Z2+2 POSITIVE/NEGATIVE

Solid carbite high speed router Z2+2 with positive/negative spiral cut. Suitable for nesting operation and also routing, cutting and shape the panels on solid wood, chipboard, MDF and playwood material.


Details View details  
FPD2520
FINISH 12 FPD2520

HELICOIDAL HW SHANK CUTTER Z3 POSITIVE WITH FINISHING CHIPS BREAKERS

Helicoidal HW shank cutter Z3 positive with finishing chips breakers. Suitable for rounding, sizing and profiling custom-made hardwood and derivatives, laminated panels and plastic materials.


Details View details  
FPS3502
VARIO 3 FPS3502

ADJUSTABLE CUTTER WITH INTERCHANGEABLE HW KNIFE 90°

Disposable insert router cutter complete with two cutting flutes Z2. Suitable for producing chamfer cuts at various angles in softwood, hardwood and other materials. Cutting angle can be adjusted steps by using a notched scale. Fine adjustment of 1° is also possible. For use on machining centers with CNC control.
Details View details  
FPS3503
VARIO 2 FPS3503

ADJUSTABLE CUTTER WITH INTERCHANGEABLE HW KNIFE 135°

Disposable insert router cutter complete with two cutting flutes Z2. Suitable for producing chamfer cuts at various angles in softwood, hardwood and other materials. Cutting angle can be adjusted steps by using a notched scale. For use on machining centers with CNC control.
Details View details  
FPS3005
MFX 5 FPS3005

High precision shank cutter with interchangeable PCD inserts for planing slave panels and CNC machine tables

Insert PCD shank cutter with interchangeable profiled knife for planning slave panels during nesting and for calibrating CNC machine tables. Suitable for working on different materials such as MDF, HDF, HPL, Trespa, Carbon fiber panels (CFRP).
Details View details  
FPS3006
MFX 6 FPS3006

High precision shank cutter with interchangeable PCD inserts for planing slave panels and CNC machine tables

Insert PCD shank cutter with interchangeable profiled knife for planning slave panels during nesting and for calibrating CNC machine tables. Suitable for working on different materials such as MDF, HDF, HPL, Trespa, Carbon fiber panels (CFRP).
Details View details  
FPD2526
FPD2526

HSS Z3 CHIP BREAKER CUTTERS FOR WORKING LAMELLAR BEAMS

HSS cutter Z3 positive with chip breaker for machining laminated beams. Compatible on machines hundegger, essetre, biesse, scm. 


Details View details